Parts That Fix KitchenAid Refrigerator KFCS22EVMS8 Door won’t open or close
Door won’t open or close is a commonly reported symptom for the KFCS22EVMS8 KitchenAid Refrigerator, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your KFCS22EVMS8 KitchenAid Refrigerator that will fix Door won’t open or close. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This is a replacement end cap for your refrigerator pantry drawer. The pantry drawer has an endcap on either side, which encloses the drawer. This end cap is for the left side of the pantry drawer only. Make sure you need the left side end cap before you order this part. This part is made of white plastic, and will fit into position on the left side of the pantry drawer. This part is approximately 20 inches wide and 7 inches tall. It is an OEM part sourced directly from the manufacturer.
This part is the replacement for the end cap on your refrigerator pantry drawer. Your pantry drawer will have two end caps; one for the right side and one for the left. This is the end cap for the right-hand side, and is sold separately from the left end cap. The part is made of white plastic and is an OEM part sourced directly from the manufacturer. To remove the old pantry drawer end cap, simply remove the pantry drawer and disconnect the end cap. Replace it with a new one, and slide the pantry drawer back into place.
These parts will attach to your drawer rail and are used to help the drawer glide smoothly.
This part helps with the closing of the door.
The seal cover fits over the flipper seal on a refrigerator and aids in sealing the door to the cabinet.
This fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.
This part is the replacement water filter cover for your refrigerator. The cover protects the water filter to prevent damage. If the water filter cover is cracked or missing, you should replace it. It is made of white plastic and is approximately 12 inches long, 5 inches wide at one end, and 4 inches wide at the other. To replace the water filter cover, simply depress the locking tabs and remove the old cover, then snap the new cover into place. This part is sold individually.