HLP141E-CF06M0E0M00 Haier Dryer - Overview

Hello Bonnie, thank you for contacting us. Remove the top of the appliance by undoing these two screws at the back. Remove the kick strip at the bottom of your machine. You may need to use a flat-headed screwdriver for this, and then undo this screw and one underneath to help release the side panel. Remove the four screws at the back that hold the side panel in position. Remove the top screw and the internal cabinet screws there. With all the screws out, now remove the side panel. Remove the screws down the side, allowing you to move the back of the machine and the drum away. To fit the new belt, what you need to do is pull the back of the machine and the drum away from the front and then drop it through the gap. Relocate the drum onto the front panel. Re-tighten all four screws that hold the side panel in place so you can fit the belt to the motor spindle. Stretch the belt over the motor spindle here. We hope this helps!