Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
Models
>
GTW220ACK5WW
GTW220ACK5WW General Electric Washer - Overview
Sections of the GTW220ACK5WW
[Viewing 4 of 4]Keep searches simple, eg. "belt" or "pump".
Lid Switch Assembly
PartSelect #: PS16554755
Manufacturer #: WH08X32697
This lid lock, also known as a door lock, is a genuine OEM replacement part for your washing machine. The lid lock keeps your washer lid closed during the washing cycle. If this part is broken, your w...
$84.03
In Stock
Pump Drain Assembly
PartSelect #: PS12723115
Manufacturer #: WH23X28418
This drain pump assembly is for washers. Drain pump assembly removes water from the washer during the drain portion of the cycle. The assembly may include multiple parts; refer to your parts diagram f...
$48.30
In Stock
Lid Lock Striker
PartSelect #: PS11729471
Manufacturer #: WH02X24399
This lid lock striker is sourced directly from the manufacturer for use in top-load washing machines. It is a white, plastic component located on the underside of the washing machine lid. When the lid...
$13.32
On Order
BELT DRIVE
PartSelect #: PS12299369
Manufacturer #: WH01X27538
This is a drive belt for various models of dryer. This belt is responsible for allowing the drive motor to rotate the dryer drum. Over time and with use, this belt will wear out and if it becomes dama...
$11.50
In Stock
Agitator
PartSelect #: PS16542670
Manufacturer #: WH43X30957
This is an agitator assembly for washing machines. Agitators are used within top load washing machines to move back and forth and effectively wash your clothes. However, if the agitator currently in y...
$83.11
In Stock
Water Inlet Valve Assembly
PartSelect #: PS12726768
Manufacturer #: WH13X26534
This is a water inlet valve; an electrically controlled solenoid valve that opens and closes when necessary, to control the flow of water into your washing machine during the washing cycle. This part ...
$37.98
In Stock
Lid Lock Bezel
PartSelect #: PS11736833
Manufacturer #: WH01X24381
This lid lock bezel, also known as a trim piece, is a genuine OEM part designed for washing machines. It is approximately 3.5 inches long. The bezel is a white, plastic frame that fits around the peri...
$8.56
In Stock
CLUTCH
PartSelect #: PS11729473
Manufacturer #: WH05X24185
This is a clutch for your washing machine. The clutch is made of a white plastic material and is used within washing machines to engage and disengage the transmission during the wash and spin cycles, ...
$8.56
In Stock
MODE SHIFTER
PartSelect #: PS16554752
Manufacturer #: WH03X30517
This is a mode shifter or shift actuator for models of washing machine. Mode shifters are designed to change the function of the washing machine motor, between spinning cycles and agitation, and is us...
$39.47
In Stock
SPEED SENSOR
PartSelect #: PS16619248
Manufacturer #: WH03X32158
This is a speed sensor for a variety of washing machine models. Speed sensors are used to monitor the speed of the washer drum and communicate it to the electronic control board to slow or quicken it....
$11.73
In Stock
ROD & SPRING Assembly RIGHT - RED
PartSelect #: PS12343378
Manufacturer #: WH16X26908
$15.98
In Stock
WASHING MACHINE ROD & SPRING-LEFT-BLUE
PartSelect #: PS12343379
Manufacturer #: WH16X26909
$13.82
In Stock
Questions And Answers for GTW220ACK5WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- 2
- 3
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tony
July 21, 2021
Washer will do everything but spin. It will agitate and drain. But will not spin, has new lid switch. Is there any wiring I can test or any ideas?
For model number GTW220ACK5WW
Hello Tony, Thank you for the question. This could indicate a defective Mode/Shift Actuator, PartSelect Number PS16554752. This part switches the appliance from Agitating to Spinning. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Michael
March 9, 2023
Were do the part 102 go to
For model number GTW220ACK5WW
Hello Michael, thank you for contacting us. We looked into your model and found that the dual harness connector will go into the belt protector case. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jennie
December 9, 2023
GTW220ACK5WW Does this model have a port for water siftener
For model number GTW220ACK5WW
Hi Jennie,
Thank you for your question.There is no fabric softener dispenser listed for your washer. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rick
February 15, 2024
Washer won’t leave wash cycle? It just keep washing. I turn knob to drain and spin and hit start and that work just fine. What is stopping or causing it not to advance in cycles?
For model number GTW220ACK5WW
Hi Rick, thank you for reaching out. Based on the description, the issue is with the mode shifter, part number PS16554752. It shifts the washer drive system between agitation and spin mode. We would recommend replacing the mode shifter to fix the issue. Good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts:
Steve
March 10, 2024
At first the lid would not lock, I tried to reset, but no luck. It worked except for draining and spinning. I was able to get the lid closed but it still won't work.
For model number GTW220ACK5WW
Hi Steve, thank you for reaching out. Use a multimeter to test lid switch assembly for continuity. When your washing machine is not draining or spinning, it is most probably caused by a faulty lid switch, even when the lid and door are closed. If the lid switch checks fine, we would recommend inspecting the drive belt, part number PS12299369. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- 3
- Next >
Common Symptoms of the GTW220ACK5WW
[Viewing 12 of 12]Will not drain
Fixed by
these parts
these parts
Show All
Will not agitate
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Noisy and Marks Left on Clothes
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Water Filling Issues
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Draining Issues
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Washer ran fine but woudl not drain water - low humming noise
Drain all the water out of the tub with a shop vac
Remove rear drain hose and drained rest of water into a bucket
Remove small rear panel (bottom left hand corner) where the drain hose connects
Tipped washer up about 45 degrees to get underneath it - Supported it with a few paint cans
Remove internal drain hose/clamps ... Read more from pump - w/ pliers
Remove belt cover (gray plastic) with socket - 3 bolts
Remove wire assembly plug from socket
Remove old drain pump with socket - 3 bolts
Install new drain pump - 3 bolts - plug wire assembly into socket
Reinstall belt cover - 3 bolts
Reinstall hose to drain pump (note panel will be inside washer)
Feed drain hose panel through hole and reinstall - 1 nut
Re attached drain hose to exterior drain plug
You are done !
Remove rear drain hose and drained rest of water into a bucket
Remove small rear panel (bottom left hand corner) where the drain hose connects
Tipped washer up about 45 degrees to get underneath it - Supported it with a few paint cans
Remove internal drain hose/clamps ... Read more from pump - w/ pliers
Remove belt cover (gray plastic) with socket - 3 bolts
Remove wire assembly plug from socket
Remove old drain pump with socket - 3 bolts
Install new drain pump - 3 bolts - plug wire assembly into socket
Reinstall belt cover - 3 bolts
Reinstall hose to drain pump (note panel will be inside washer)
Feed drain hose panel through hole and reinstall - 1 nut
Re attached drain hose to exterior drain plug
You are done !
Read less
Parts Used:
-
Mike from NAPLES, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
46 of 60 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not drain the water from the tub.
Very simple to repair. Be sure to drain the tub outside or into the sump pump then lay the washer on its side. The pump is right there on the bottom of the basket with 3 bolts. You will also need to remove the belt cover to get to the plug. So simple and saves you hundreds off repair man prices.
Parts Used:
-
Micheal from South Bend, IN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
27 of 37 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wife pull up door when it was in lock mode
Lift up door removed lid lock with screwdriver installed new part
Parts Used:
-
Wiley from Wilson, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
26 of 47 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!