This drum glide bearing is an authentic OEM replacement part that is compatible with dryers. It is white in color and made of highly durable plastic. The bearing allows the drum to rotate smoothly and...
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ...
This is a replacement lint filter slide for your dryer. It is approximately 14 inches long and 5 inches wide. It is made of white plastic and is sold individually. The slide mounts to your dryer and a...
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
This is a door handle made for use with dryers. This door handle is made of solid white plastic and allows you to open and close the door of the dryer. If your current dryer door handle is broken or m...
The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a ...
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
$87.83
In Stock
Questions And Answers for GTUP240EM1WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kenneth
December 21, 2019
What year was it made? How much is a dryer belt?
For model number GTUP240EM1WW
Hello Kenneth and thanks for writing.
Additional to the model number we also need the serial number to establish the year of your unit. Looking forward to your reply, please always include the model number. We hope this helps. Please contact us anytime.
Belt Part Number: PS3505459 is in the list of compatible items for your model. If you would like to place an order with our company or inquire about pricing, availability, and shipping, you will have to contact our customer service. You can do so one of two ways: online: www.partselect.com or telephone: 888-738-4871. Thank you.
Is model a 110 or a 220?What kind of plug in the wall does it take.
thank you
For model number GTUP240EM1WW
Hello and thank you for writing.
It is 220 volts on the double breaker and it takes a regular dryer plug . We hope this helps. Please contact us anytime if you require further assistance.
For your convenience, we have attached the link to your installation instructions. We hope this helps. Good luck with your repair.
https://partselectcom.azureedge.net/assets/manuals/7A6774C2ACFDF35577AFD3C5E983C760BC72C5B0.pdf
Was this helpful?
Thank you for voting!
Ray
December 21, 2022
Need parts
Dryer door handle
Knob
For model number GTUP240EM1WW
Hi Ray, thank you for reaching out. The dryer door handle is part number PS12743305, and the knob is part number PS3496859. If you require assistance to place an order, please contact customer service. We hope that helps!
Our washer is giving the codes for the door lock the washer and the spin is flashing. We replaced the door latch. It works for one day. We replace the main computer board. It worked for three days if we run it through the diagnostics, everything works but when you try to use it, it will not work.
For model number GTUP240EM1WW
Hello Joyce, thank you for contacting us. We would recommend checking the actuator, part number PS3499738. It is a likely culprit. It presses the lid switch when you close the lid to start the washer which generates a signal of lid lock. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
It was actually my father, he doesn't use the internet. He thought that because the dyer got real hot and then shut off he thought the thermostat wasn't working and the high temp shutoff was okay. He went through the manual and found the part and took it out. He called the service number but they wanted $50 dollars plus shipping. I saw it
... Read more was a Thermo-disc part so I tried the manufacture's website but I couldn't match the numbers on the back to their part numbers. I tried several other sites and your site was the cheapest. It was real easy to use the web site and diagrams to find the right schematic and part. I ordered it online and it was delivered in 2 days with the regular shipping. When he first put it in the dyer didn't turn on. He found no power coming out of the timer so he cleaned the contacts and it worked. Thanks for making the ordering so easy.
The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a pow
... Read moreer fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website.
