Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
The tub dampening straps support the wash tub and reduce vibration by keeping the tub at the center of the cabinet. If your washer shakes and moves, or is making a loud banging noise during the wash c...
This set (Knob and Clip Assembly, Control Knob, Dryer Control Knob) allows you to replace the knob on your timer if it is damaged or missing. The plastic knob can break around its shaft, or the retain...
This is a replacement timer knob for your washing machine. To complete this repair you will need a pair of needle nose pliers. Turn off power to the washer before you start. Pull off the timer knob an...
This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start or shut off, the ti...
The drain hose is black in color and made of flexible material. This is a part for your top-load washer. The hose measures 57 inches long. This part moves the water out of the washer and into the drai...
This is a dual-action agitator for a washer. It is an OEM replacement part that is sourced from the manufacturer. The agitator tosses your clothes to clean them efficiently. This plastic dual-action a...
This timer dial with compression ring shows you which part of the cycle your washer is in. It is white in color and can be found mounted on the timer shaft. You may need to replace this part if your ...
The main tub seal is located between the transmission and the outer tub. Its the primary water seal in the outer tub for the transmission-shaft. If your washer is leaking during the fill cycle, or at ...
This is a tub bearing and it is meant to work in conjunction with your washing machine. The purpose of this part is to aid in keeping the inner tub of your washing machine spinning smoothly during a w...
This split ring is supplied by the original equipment manufacturer, and it is designed to secure the tub bearing in washing machines. It is a circular metal ring, with an outer diameter of 2 inches. T...
This tub bearing goes in your washing machine. You will find it on the bottom of the outer tub, where the transmission goes through the tub. If you hear metal on metal when the washer is spinning, you...
$27.58
In Stock
Questions And Answers for GTAN2800D1WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Caroline
June 28, 2021
Hi, when my wash is finished. Water drips into the tank for a while. About 50ml drop to drop.1-is it the valve that is defective? 2-can it cause an imbalance between the difference in flow between cold water and hot water? 3-is this a risk for possible water damage? Thanks' for your answers and sorry for my English. Caroline
For model number GTAN2800D1WW
Hello Caroline, Thank you for the question. This normally indicates the Water Valve will needs to be replaced. Over time it can leak at a faster rate and cause to over flow over night or if left for a long period of time. If the Hot Water port is the port that is stuck open or leaking it can cause the Cold water fill to be warm and vise versa. We hope this helps!
So I took apart this washer to do a deep clean of the tub, and I noticed that there’s water remaining at the bottom of the tub and that the back hoses are always filled with water. Before I go looking further, is it normal for a little water to always be at the bottom or should it be draining all the way? Thanks!
For model number GTAN2800D1WW
Hello Layne, Thank you for your inquiry. You could have a clog or kink in the hose that could prevent it from draining properly. Check the drain pump as well for any debris that could prevent the water from draining completely and check the hoses for any obstructions. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Glenn
January 17, 2023
When in spin mode it is yery noisy
For model number GTAN2800D1WW
Hello Glenn, thank you for reaching out. One of the most common reasons your washer makes banging sounds during the spin cycle is an unbalanced load. If that is not the case, we would recommend checking the Drive Pulley, part number PS1482349, Tub Bearing, part number PS271510, and Tub Dampening Strap, part number PS271100. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Washer filling property for a wash load, but it isn’t filling all the way for the rinse cycle.
For model number GTAN2800D1WW
Hi Lynn, thank you for reaching out. Based on our research, the issue is probably with the pressure switch, part number PS3487295. Before replacing it, we would recommend checking the washer timer. We hope this sorts out your problem!
Hello Merle, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS1482286 for the Timer Knob and Part #: PS1482363 for the Timer Dial with Compression Ring and Part #: PS9493075 for the Smaller Control Knob and Clip. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I spoke to a very nice young ladie who took my order and I received my order within two days. I pull the clasp off of the old knob and replace the knob and the clasp with the new part and it now works great. Thank you for helping me find the part I needed.
After removing frt panel which prys off I checked for anything obvious like a loose belt. Then I jiggled the magnet switch located on the inside of the loading cover. I saw the machine start agitating the it stopped again when I stopped touching it. I ordered the new part and spliced it in with the wire crip tool. Now the machine is A ok.
