This OEM ice and water filter fits side-by-side and bottom-freezer GE models. The most common reason you would need to change this part is if you have never updated your model and it is no longer filt...
$73.07
In Stock
Order within the next 5 hrs and your part ships today!
The French door divider spring fits most Samsung French door style refrigerators. The spring applies tension between components in the refrigerator, which engages and retracts the door flap. This will...
$13.24
In Stock
Order within the next 5 hrs and your part ships today!
This is a replacement spring pin for French door-style refrigerators. This part is made of white plastic and is approximately ½ an inch in length. If the mullion that keeps the doors closed is not wor...
This part is the replacement French door hinge for your refrigerator. It is made of white plastic and is approximately 1 ¼ inch by 1 inch. The French door hinge can also be known as the flipper hinge....
This part holds the ice once it's released from the icemaker. When activated, the auger rotates and pushes ice out of the bin through the chute to the user
$306.65
In Stock
Order within the next 5 hrs and your part ships today!
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
$299.71
In Stock
Order within the next 5 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
January 8, 2020
Ice maker ceased filling with water. Fully defrosted due to ice buildup in fridge compartment. Filters changed. Ice maker reset. No blockage of water fill tube. Water flow to water dispenser. Is reasonable to think it is a malfunctioning ice maker, or should i further consider the pump in the rear?
For model number GFSF6KKYCWW
Hello James,
Thank you for your question. Our sources suggest replacing the ice maker assembly under part PS2577893 for your model to fix the issues. We hope this helps!
Ice maker won't stop making ice. Keeps going from ice, crushed ice, water.
For model number GFSF6KKYCWW
Hello Clarence, Thank you for the question. We suggest checking the bucket is properly positioned directly under the icemaker and the Ice Maker Arm is operating normally. If the Bucket and Arm are good, you may have a defective Dispenser Control Board. We hope this helps!
Vegetables in the refrigerator seem to be freezing ? How can I check the temp in the refrigerator and how can I reset the temp in the refrigerator if needed.and what is the corect setting.
For model number GFSF6KKYCWW
Hi Al,
Thank you for your question. If the temperature in the freezer is too cold, you will be able to reset it on the dispenser control panel. We have included a link to your owner's manual that you may reference on how to adjust the temperature inside your refrigerator. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Hi we're is the fan motor located that cerclates the air inside the refrigerator.Tank you.
For model number GFSF6KKYCWW
Hello Dustin, thank you for the question. The part you are looking for is the evaporator fan motor, part number PS2338132. It is located inside the back panel of the freezer section. We hope this information helps!
Unscrew old filter and remove(counterclockwise). Line up arrow on new filter with arrow on connection housing. Turn clockwise till resistance met. Do not overtighten. Follow directions. Simple.
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video t
... Read morehe installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.
