Models
>
FUF21SVARWW
FUF21SVARWW General Electric Freezer - Overview
Sections of the FUF21SVARWW
[Viewing 3 of 3]Keep searches simple, eg. "belt" or "pump".
Key
PartSelect #: PS11729544
Manufacturer #: WR01X26468
This key is for freezers. If your key will not lock or unlock the freezer door, check it to see if it has been bent or damaged. If it has been damaged, you should look to replace it to avoid damaging ...
No Longer Available
Run Capacitor - 220Vac
PartSelect #: PS1766253
Manufacturer #: WR62X10058
This is a run capacitor. It is 220 VAC (volts alternating current) and is used in conjunction with your freezer. This part helps the compressor kick on and off while maintaining a constant temperature...
No Longer Available
Defrost Thermostat
PartSelect #: PS303451
Manufacturer #: WR50X10031
The thermostat senses that the heat near the cooling coils has reached the desired temperature.
No Longer Available
R134 DRIER
PartSelect #: PS12727537
Manufacturer #: WR86X25269
The filter dryer filters refrigerant that travels through the sealed system of the refrigerator.
$62.27
In Stock
Questions And Answers for FUF21SVARWW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
January 7, 2020
Non-profit freezer, is this model frost-free? It's frosting up. Are cooling coil with possible frost free heaters in top of unit? Control works then hi temp & door open led lights start blinking fast. No alarm is heard and internal light not working. Bad electronic temp control?
For model number FUF21SVARWW
Hello Kevin, thank you for your question. This unit should self defrost. The temperature control board sounds to have failed. We would recommend replacing that part. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Wade
January 28, 2020
Is temp controller mounted on front door also defrost control and main control board , it also says thermistor no longer available does anyone know what thermistor ohms values are at 32 degrees fahrenheit etc and or at minus 5 degrees today fahrenheit
For model number FUF21SVARWW
Hello and thank you for writing.
Yes, the EZ control PS3491624 is mounted on the front door. The defrost thermostat PS303451 is located inside the bottom to the left of the coils. The EZ control is the control board. You will want to check this thermistor at room temp and should have a resistance of 10K ohms at room temp. If leaving in the unit try and put the meter on 200K setting and see if you get a reading. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the FUF21SVARWW
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The freezer door was catching when opened and frost was building inside telling me that the seal wasn't good.
I called the local GE dealer for repair. The repair person arrived and told me that he could not get the part. The freezer was too old. Then he charged me $60 for coming out. I went online and did a search for parts with the model number above. I found Partselect.com and the diagrams showed which part I needed. It was in stock and I
... Read more
ordered it. My husband and I removed the door to the freezer, pushed the part into the hole at the bottom of the door and put the door back on its hinges. It works perfectly. Thank you.
Read less
Parts Used:
-
Paulette from Great Falls, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
12 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not respond when button was pushed
-
Norman from COVENTRY, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ez control failed after lightening storm
-
James from NORMAN, OK
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!