This is a door latch, also known as a door strike, for some models of washing machine. This part secures to the door of the washer and secures the door when it is shut, to ensure the inside drum of th...
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
This is a door boot, also known as a door gasket or door bellows, for various models of washing machines. This door boot is used to seal the inner drum of the washing machine from the inside of the w...
This part is located between the front and rear outer tubs.
$76.33
In Stock
Questions And Answers for EFLS517SIW0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
September 3, 2021
Fabric softener wont dispense. Holes not plugged up. Housing dispenser?
For model number EFLS517SIW0
Hello George, Thank you for the question. If the Hoses and holes were checked and not plugged, we suggest checking to see if water is entering the Dispenser. If there is no water in the dispenser, you may have a defective Water Valve. We hope this helps!
My washer makes a loud noise like a worn pump during wash cycles. I suspect a recirculating pump. There are two pumps shown in your parts list: PS12365825 and PS12365825. Can you help me select the proper part?
For model number EFLS517SIW0
Hello Bruce, thank you for your query. The circulating pump that fits your model is part number PS12365825. It recirculates wash and rinses water throughout the wash tub. We hope this is what you were looking for!
Two "options" won't stop being options -- they are stuck, if you will. They are the extra rinse and the wrinkle release options. Having two extra options makes the cycles much longer and uses more water and electricity. Please advise!
For model number EFLS517SIW0
Hello Helen, thank you for contacting us. We have concluded that the issue is with the control board, part number PS11766152. We would recommend checking it to fix the issue. We hope this helps.
We need a single screw from the door hinge. Can we get that sold separate? Or do we need to buy the door hinge assembly?
For model number EFLS517SIW0
Hello Brian, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11766100. Hope this helps!
My washer is smoking 0n the final spin cycle. Have already replaced drive belt. What else could it be?
For model number EFLS517SIW0
Hello Annett, thank you for your inquiry. The answer depends on the location of the smoke. Smoke coming from the bottom of the washing machine indicates a problem with the Washer Motor Control Board PS11766139. Smoke coming from the upper back of the machine indicates a bad Fill Valve Solenoid PS11766077 . And smoke coming from the control panel indicates a bad Electronic Control Board PS11766152. We hope this is of some help to you.
I googled the problem, read the recommendation found the part and read that it was an easy fix. Took the broken part off the door and noticed the broke off piece was in the latch on the machine. Ordered the two parts, paid the $30 2-day delivery. Parts arrived and the machine was up and runnning in under 5 minutes
Remove two screws on attachment plate slide door lock plate out. Disconnect wire harness. Remove two screws on back side. Then reverse the process, done!
P.S. don't pay $32 for next working day it still took 3 days to arrive. doesn't help when your leaving in two.
Removed broken off part with screwdriver and replaced with the new. The store repair man was going to charge $129 and we were able to do it ourselves for $30. A big thank you!
