Models
>
CAHE18ER1
CAHE18ER1 Crosley Air Conditioner - Overview
Sections of the CAHE18ER1
[Viewing 3 of 3]Manuals & Care Guides for CAHE18ER1
Click to downloadInstall
Installation Instructions
(0.5MB)
Manual
Owner's Manuals
(0.75MB)
Wiring
Wiring Diagram
(0.08MB)
Keep searches simple, eg. "belt" or "pump".
Fan Blade
PartSelect #: PS1533143
Manufacturer #: 5304459172
Also known as Blower Wheel.
$76.36
Special Order
RELAY
PartSelect #: PS1533253
Manufacturer #: 5304459461
The heater relay controls the operation of the heating coils in a room air conditioner. The heater relay acts as a bridge between the thermostat and the heater, allowing the low voltage thermostat to ...
$171.67
Special Order
Questions And Answers for CAHE18ER1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
fried pc board
took out old pc board held by screws and put new one in .....if it were not for this co. I would be out 400 bucks for a new ac unit ... THANKS !!!!!
Parts Used:
-
Bryan from Shallotte, NC
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad relay
I pulled the unit out of the cabinet, and got into the wiring panel with a Phillips screwdriver. I pulled the wires off of the old relay and put them back onto the new one. I put the cabinet back together and turned the unit on !!!! Worked like a champ... Thank so much
Parts Used:
-
larry from midland, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
On/Off Button On A/C Wouldn't Work At Times
I noticed that the a/c wouldn't come on after I pressed the on button. Then later that night a/c would kick on by itself and it was blowing cold. I took a shot and ordered the display board that also contains on/off button. First thing I did (and most important part) is remove plug from outlet. Then I removed front panel, which re
... Read more
quired removal of 4 phillips head screws. That allowed me access to pc board. Pc board had just one phillips head screw. Pulled board away from unit slightly and unplugged the board from wire harness. It was very simple to do. Just reverse to install new board. Again, you must unplug unit before any maintenance. Now unit runs better than ever!!
Read less
Parts Used:
-
Damian from Lutcher, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!