This is a float manufactured to fit into your dehumidifier. When the dehumidifier is in use and water is being absorbed from the air, the float detects the water level in your dehumidifier water bucke...
$18.63
In Stock
Order within the next 4 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
WILLIAM
March 20, 2020
Fan comes on moves air,setting is on co but does not remove any moisture from the air
For model number ADEL50LRQ1
Hi William,
Thank you for your question. If the dehumidifier is not drawing water from the air, there are some parts that you will need to check to see which one is causing the issue. You will need to check the capacitor, the overload, the fan motor and the electronic control board. Here is a link from our website that you may view for information on how to test these parts, https://www.partselect.com/Repair/Dehumidifier/Unit-No-Longer-Pulling-Water-From-Air/. We hope this helps. Thank you and have a great day.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
March 27, 2020
1. I purchased my GE dehumidifier at home depot a few years age and can't find my model # listed on any web site. ??????
2. the fan and compressor come when unit is started, after a couple of minutes the compressor will shut off and will not come on again. the water bucket is always empty.
For model number ADEL50LRQ1
Hello Jim, thank you for your inquiry. The only part that is showing in the symptoms list for your model not staying on, would be the water bucket float, PartSelect number PS3512331. If the connector for this part is faulty in any way, the bucket may under fill and will not stay on. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Byron
December 21, 2021
My dehumidifier will not stay running
For model number ADEL50LRQ1
Hi Byron,
Thank you for your question. If your dehumidifier will not stay on, there are some parts that you will need to check to see which one is causing the issue. You will need to check the float, the sensor and the humidity control. We have included a link that you may reference on how check these parts. We hope this helps! Good luck with the repair!
Hello James, thank you for getting in touch. If your dehumidifier is not collecting water, the unit is not operating properly. Try resetting the dehumidifier by disconnecting the power to the unit for 30 seconds and reconnecting the power. Then, set the control settings and see if the unit operates properly. If this does not help, you will need to check the capacitor, the overload, and the electronic control board. Here is a link from our website that you may view for information on how to test these parts, https://www.partselect.com/Repair/Dehumidifier/Unit-No-Longer-Pulling-Water-From-Air/. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
1st of all, glued the broken prong that secured the float. Worked temporarily before breaking again. Started to trash the dehumidifier then looked online using the Model number. Parts select appeared thru the search and to my surprise, the part was available for under $20.00.
Ordered part and replaced it with ease. Works gr
... Read moreeat!
my model is so old it is no longer part of the GE inventory but looking at the photos on line - which are very good and detailed - and chatting with on line help decided to go ahead and order and it fit perfectly
