Models
>
95220
95220 Tiller - Overview
Models starting with 95220
Click on the best match to narrow your results.
- 95220 ( 1992 ) Yard Machines Tiller (Yard Machines Tiller Model 95220/1992 Parts)
- 95220 ( 1991 ) Yard Machines Tiller (Yard Machines Tiller Model 95220/1991 Parts)
- 95220 ( 1999&Before ) Husqvarna Tiller (Tiller)
- 952200 Husqvarna Tiller (Husqvarna Tiller Model 952200 Parts)
- 952201 Husqvarna Tiller (Husqvarna Tiller Model 952201 Parts)
- 952202 Husqvarna Tiller (Husqvarna Tiller Model 952202 Parts)
- 952203 Husqvarna Tiller (Husqvarna Tiller Model 952203 Parts)
- 952204 Husqvarna Tiller (Husqvarna Tiller Model 952204 Parts)
- 952205 Husqvarna Tiller (Husqvarna Tiller Model 952205 Parts)
- 952206 Husqvarna Tiller (Husqvarna Tiller Model 952206 Parts)
- 952207 Husqvarna Tiller (Husqvarna Tiller Model 952207 Parts)
- 952208 Husqvarna Tiller (Husqvarna Tiller Model 952208 Parts)
Keep searches simple, eg. "belt" or "pump".
Clevis Pin
PartSelect #: PS9009427
Manufacturer #: 532132673
This clevis pin is an OEM replacement part that is compatible with various makes and models of tiller and is sold as an individual part. The purpose of this pin is to snap or break under a certain amo...
$3.99
In Stock
Clip, Hairpin
PartSelect #: PS9007536
Manufacturer #: 532003146
This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1....
$3.99
In Stock
Jamlock Nut, 3/8-16
PartSelect #: PS9299545
Manufacturer #: 712-0266A
The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replace...
$3.99
In Stock
Bearing .62" I.D. x 1.38" O.D. x .437" Thk.
PartSelect #: PS9167498
Manufacturer #: 941-0155
This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised ...
$24.15
In Stock
Fl-Wash 1.00" X 1.63" O.D. X 03
PartSelect #: PS9166464
Manufacturer #: 936-0163
This Flat Washer helps to spread load under a nut or bolt in a wide variety of lawn and garden equipment. Its dimensions are 1.00 inches x 1.63 inches O.D. x 03. This part is silver and made of metal,...
$3.43
Special Order
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.99
In Stock
Lock, Handle
PartSelect #: PS9007833
Manufacturer #: 532109229
Measuring approximately 1-inch in length, this handle lock is designed for use with various models of tiller machines. This handle lock is fastened to the base of the handle to secure the lock lever a...
$7.46
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Parts Used:
-
LISA M from BATESVILLE, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!