Models > 31E877-1502-G5

31E877-1502-G5 Briggs and Stratton Engine - Overview

Sections of the 31E877-1502-G5

[Viewing 7 of 7]
Page Diagram and Parts List for Briggs and Stratton Engine
Page
Page Diagram and Parts List for Briggs and Stratton Engine
Page
Page Diagram and Parts List for Briggs and Stratton Engine
Page
Page Diagram and Parts List for Briggs and Stratton Engine
Page
Page Diagram and Parts List for Briggs and Stratton Engine
Page
Page Diagram and Parts List for Briggs and Stratton Engine
Page
Page Diagram and Parts List for Briggs and Stratton Engine
Page
Keep searches simple, eg. "belt" or "pump".
Gasket--Rocker Cover – Part Number: 272475S
Gasket--Rocker Cover
PartSelect #: PS8941245
Manufacturer #: 272475S
This OEM Gasket Rocker Cover, which can also be called the Valve Cover Gasket, is used to provide a seal between the valve cover and engine. This is a gray-colored part, measuring 5 1/2 x 4 Inch, and ...
  No Longer Available
Seal--Oil (PTO Side) – Part Number: 795387
Seal--Oil (PTO Side)
★★★★★
★★★★★
(2)
PartSelect #: PS9151828
Manufacturer #: 795387
This OEM Seal-Oil (PTO Side), also called the Oil Seal, is a Black, Nitrile Rubber, 2/14 O.D., individually sold part which is installed using a Seal Puller. Customers rate the installation difficulty...
$7.88
  In Stock
Cylinder Head Gasket – Part Number: 796584
Cylinder Head Gasket
★★★★★
★★★★★
(1)
PartSelect #: PS9142383
Manufacturer #: 796584
This is a replacement cylinder head gasket for your small engine. It is approximately 5 inches in width and 6 inches in length. The cylinder head gasket helps to create a seal for the cylinder head. I...
$21.52
  In Stock
Gasket Set-Valve – Part Number: 794152
Gasket Set-Valve
★★★★★
★★★★★
(1)
PartSelect #: PS9141388
Manufacturer #: 794152
$31.69
  On Order
Seal,Oil – Part Number: 391086S
Seal,Oil
★★★★★
★★★★★
(1)
PartSelect #: PS9277860
Manufacturer #: 391086S
The Oil Seal is a manufacturer-approved rubber part which provides a seal between the crankcase and crankshaft by attaching around the axle shaft on the crankhouse housing. Installation is rated as "M...
$6.59
  In Stock
Gasket--Exhaust – Part Number: 692236
Gasket--Exhaust
PartSelect #: PS9294808
Manufacturer #: 692236
This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in...
$5.71
  In Stock
Seal-O Ring – Part Number: 691917
Seal-O Ring
★★★★★
★★★★★
(1)
PartSelect #: PS9294749
Manufacturer #: 691917
The Seal-O Ring, also known as the gasket, is red in color, made of rubber, and is an OEM part that requires some skill to replace. This part is designed to create a seal between the carburator and ma...
$4.99
  In Stock
Pump-Fuel – Part Number: 808656
Pump-Fuel
★★★★★
★★★★★
(1)
PartSelect #: PS9154486
Manufacturer #: 808656
$113.45
  On Order
Tube--Breather – Part Number: 794683
Tube--Breather
PartSelect #: PS9306838
Manufacturer #: 794683
$8.01
  In Stock
Rod-Push (Intake) – Part Number: 692003
Rod-Push (Intake)
★★★★★
★★★★★
(2)
PartSelect #: PS9294769
Manufacturer #: 692003
$8.61
  In Stock
Gasket--Crankcase (.015 Thick) – Part Number: 697110
Gasket--Crankcase (.015 Thick)
PartSelect #: PS9076878
Manufacturer #: 697110
$7.88
  In Stock
Engine Ignition Coil – Part Number: 595304
Engine Ignition Coil
★★★★★
★★★★★
(1)
PartSelect #: PS11829380
Manufacturer #: 595304
Ignition coil 595304 is an original equipment manufacturer (OEM) part that fits Briggs & Stratton lawn and garden equipment engine models 31R907-0018-G1, 33R877-0002-G1, 33R877-0009-G1 and 33S877-0015...
$45.44
  In Stock
View More
Back to Top

Questions And Answers for 31E877-1502-G5

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Gas leaking from tube breather
First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mower with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.
Read less
Parts Used:
Tube--Breather
  • Emanuel from FERRIDAY, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
4 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top