21AT144R766 (2004) Troy-Bilt Cultivator - Overview

TT Screw 1/4-20 x 0.5 Add to cart

Fuel Pick-Up Line with Filter

★★★★★

★★★★★

(1)

The Fuel Pick Up Line with Filter is an OEM plastic part used to filter and deliver fuel to the carburetor. If broken, the engine will not get fuel and the part should be replaced. This part is rated ... Add to cart

Fuel Return Line The Fuel Return line is a blue plastic tube which attaches to the purge bulb and fuel tank in order to return fuel back to the tank after the primer bulb is pressed. It is rated "Easy" to install and ... Add to cart

Switch This Switch is a black, plastic on/off switch for a trimmer. Installation of this manufacturer-certified switch is rated as "Easy" and requires a screwdriver, wrench set and socket set. Refer to your ... Add to cart

Flex Shaft Add to cart

Click Pin This Click Pin (aka a Lynch Pin) is a metal, gold, individually sold pin which can be installed with a screwdriver and socket set. It attaches to the gearbox assembly and will need to be replaced if m...

Nut, Flange Lock, 1/4-20 Add to cart

Fuel Cap

★★★★★

★★★★★

(1)

Add to cart

Drive Shaft Housing Upgrade Kit Add to cart

Recoil Spring The Recoil Spring is a silver, metal spring which attaches inside the starter assembly. It is used to wind the rope back around the pulley after it has been pulled. If broken, the starter rope will no... Add to cart

Clutch with Washer Add to cart

Clutch Drum The Clutch Drum is a silver, metal part used to transmit power from the engine to the drive shaft. Installation is rated "Medium" difficult and will require a screwdriver, wrench set, and torx wrenche... Add to cart