This fuel filter is for lawn and garden equipment engines.
Fuel filter cleans the fuel before it reaches the carburetor.
Work in a well-ventilated area when installing this part. Drain the fuel...
$4.99
In Stock
Order within the next 6 hrs and your part ships today!
The air filter prevents dirt and debris from entering the engine on your lawn equipment. This is an OEM filter that is white, roughly 2x3.5 inches in dimension, and can only be purchased individually....
$3.99
In Stock
Order within the next 6 hrs and your part ships today!
This Fuel Line is a 25-inch, clear, plastic line used to deliver fuel. It requires a screwdriver, pliers, socket set, and nut driver and is rated as "Easy" to install by customers. If the fuel line we...
$7.46
In Stock
Order within the next 6 hrs and your part ships today!
The Fuel Line Fitting is a plastic part which attaches two pieces of fuel line together. If broken due to damage/fatigue, there may be a leak and the part must be replaced. Installation is rated as "E...
$4.99
In Stock
Order within the next 6 hrs and your part ships today!
This carburetor rebuild kit (part number 545081848) is for lawn and garden equipment engines.
Carburetor rebuild kit 545081848 includes gaskets and parts for rebuilding the carburetor.
Work in a...
$46.07
In Stock
Order within the next 6 hrs and your part ships today!
Order within the next 6 hrs and your part ships today!
Questions And Answers for 128LD
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
April 11, 2022
I think my motor is locked because I forgot to add oil in the gas. Starter string wont pull .Its @ 3 years old but not that used. Can it be fixed, and how, or is all lost ?
For model number 128LD
Hello Bill, Thank you for the question. First, remove the spark plug and try to pull the starter rope. If you can't pull the starter rope, the engine has most likely seized. You can also try attaching a long rachet to the flywheel nut and try to move the crankshaft. If it doesn't move it's seized. I hope this helps and good luck with your diagnostics.
Was this helpful?
Thank you for voting!
Johnny
April 8, 2023
How long should the return line be inside of fuel tank
For model number 128LD
Hello Johnny, thank you for your question. You can shove it in up to 4 inches. Good luck with your repair.
Was this helpful?
Thank you for voting!
Alvinruns
November 30, 2023
runs for 1 or 2 min then just stops but wiill start back up right away
For model number 128LD
Hello Alvinruns, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the fuel filter and fuel line. If they are not faulty, then replace the spark plug, part number PS8996058, to solve the problem. We hope this information helps!
I’m looking for a plastic coupler at the end of the upper flex shaft that connects the upper and lower sections.. mine got shreaded and the now the lower cable cant spin the trimmer head. Is it sold separate or w/ another part?
For model number 128LD
Hello Tony, thank you for contacting us. The coupler assembly you are looking for is part number PS17016851. It is sold separately. If you need help placing an order, customer service is open 7 days a week!
Hi Gordon, thank you for reaching out. Please follow the given instructions to remove the fuel tank:
1- Remove the three screws holding the muffler guard.
2- Unthread the two screws to remove the shield.
3- Unthread the three screws holding the rear shroud and remove the tank.
We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I ended up having to also replace the crankshaft bearing well as the cylinder kit. The owner thought the knocking was too much oil which led to a scori g of the cylinder when it needed crank bearing replaced. Sorry Huskvarna the first one wouldn't weedeat this was the second.