Models > 11061632612

11061632612 Kenmore Dryer - Overview

Sections of the 11061632612

[Viewing 1 of 1]
Diagram Diagram and Parts List for Kenmore Dryer
Diagram
Keep searches simple, eg. "belt" or "pump".
Dryer Drum Support Roller – Part Number: WPW10314173
Dryer Drum Support Roller
★★★★★
★★★★★
(38)
PartSelect #: PS11752609
Manufacturer #: WPW10314173
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
$22.69
  In Stock
Thermostat, Internal-Bias – Part Number: WP8577274
Thermostat, Internal-Bias
★★★★★
★★★★★
(30)
PartSelect #: PS11746740
Manufacturer #: WP8577274
The internal-bias thermistor (Thermistor, Dryer Thermister, Dryer Thermistor) prevents the dryer from overheating by monitoring and controlling the temperature of the inside of the dryer drum. It is l...
$47.74
  In Stock
Roller Support Tri-Ring – Part Number: WPW10512946
Roller Support Tri-Ring
★★★★★
★★★★★
(5)
PartSelect #: PS11755850
Manufacturer #: WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$13.42
  In Stock
Leveling Foot – Part Number: 49621
Leveling Foot
★★★★★
★★★★★
(13)
PartSelect #: PS1609293
Manufacturer #: 49621
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
$11.40
  In Stock
Idler Pulley with Bracket – Part Number: W10837240
Idler Pulley with Bracket
★★★★★
★★★★★
(41)
PartSelect #: PS11726337
Manufacturer #: W10837240
The idler pulley wheel is now sold with this arm. This idler pulley is for dryers. Idler pulley maintains correct tension on the drive belt to spin the drum.
$26.79
  In Stock
Screw - 10-16 x 1 – Part Number: WP3387230
Screw - 10-16 x 1
★★★★★
★★★★★
(2)
PartSelect #: PS11741409
Manufacturer #: WP3387230
This screw is sold individually.
$7.95
  In Stock
Cover Screw – Part Number: WP308685
Cover Screw
PartSelect #: PS11740701
Manufacturer #: WP308685
Sold individually.
$7.95
  In Stock
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(1)
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.00
  In Stock
Screw – Part Number: WP488729
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11742721
Manufacturer #: WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
$7.91
  In Stock
D-Shaped Knob Insert – Part Number: WP8536939
D-Shaped Knob Insert
★★★★★
★★★★★
(2)
PartSelect #: PS11746209
Manufacturer #: WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
$11.10
  In Stock
Blower Wheel – Part Number: WP697772
Blower Wheel
★★★★★
★★★★★
(7)
PartSelect #: PS11743811
Manufacturer #: WP697772
The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over ...
$71.02
  In Stock
Drum Support Shaft - Rear Shaft with Right Hand Threads – Part Number: WPW10359272
Drum Support Shaft - Rear Shaft with Right Hand Threads
★★★★★
★★★★★
(2)
PartSelect #: PS11753708
Manufacturer #: WPW10359272
Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.
$52.73
  In Stock
View More
Back to Top

Questions And Answers for 11061632612

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the 11061632612

[Viewing 8 of 8]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not Heating
Fixed by
these parts
Fixing
Show All
Leaking
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing
Show All
Back to Top
Replacing the Dryer Drum Support Roller

Replacing the Dryer Drum Support Roller

Replacing the Idler Pulley with Bracket

Replacing the Idler Pulley with Bracket

Replacing the Roller Support Tri-Ring

Replacing the Roller Support Tri-Ring

Replacing the Thermostat, Internal-Bias

Replacing the Thermostat, Internal-Bias

Replacing the Leveling Foot

Replacing the Leveling Foot

Replacing the Leveling Foot

Replacing the Leveling Foot

Replacing the Blower Wheel

Replacing the Blower Wheel

Replacing the Drum Support Shaft - Rear Shaft with Right Hand Threads

Replacing the Drum Support Shaft - Rear Shaft with Right Hand Threads

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Parts Used:
Touch-Up Paint - White
  • Michelle from Richardson, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
65 of 129 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
worn out part
The repair was fairly easy. The most timely part of the repair was removing the twelve screws from the back panel to expose the repair.
Parts Used:
Dryer Drum Support Roller Drum Support Shaft - Rear Shaft with Right Hand Threads WASHER Roller Support Tri-Ring
  • John from Tucson, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
41 of 60 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit would shut down in the middle of cycle and flash E1 trouble code
Had to remove the back of unit to access the area of subject part by removeing 12 to 14 screws also the gas line had to be removed. Two screws held the part in place. Unit now runs normal.Saved alot on repair costs!!!!!
Parts Used:
Thermostat, Internal-Bias
  • Jim from Tucson, AZ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
30 of 40 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top