Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
Models
>
11022352511
11022352511 Kenmore Washer - Overview
Sections of the 11022352511
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".
Drive Hub Kit
PartSelect #: PS6012095
Manufacturer #: W10528947
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
$34.00
In Stock
Washer Drive Pulley
PartSelect #: PS10057144
Manufacturer #: W10721967
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$54.48
In Stock
Drive Belt
PartSelect #: PS11747978
Manufacturer #: WPW10006384
The main drive belt is designed to ride on the pulley until the basket gets up to speed.
$19.75
In Stock
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.43
In Stock
Water Inlet Valve
PartSelect #: PS12349267
Manufacturer #: W11210459
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work glove...
$70.69
In Stock
Washing Machine Door Lock Assembly
PartSelect #: PS12704713
Manufacturer #: W11307244
This is lid lock designed for use within various washing machines. This lid lock, also known as a latch assembly, is used to secure the lid of your washing machine during the washing cycle. If your wa...
$139.49
In Stock
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.02
In Stock
D-Shaped Knob Insert
PartSelect #: PS11746209
Manufacturer #: WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
$11.12
In Stock
Suspension
PartSelect #: PS12347546
Manufacturer #: W11130362
This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absor...
$113.79
In Stock
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.12
In Stock
Lid Hinge Mounting Screw
PartSelect #: PS11748588
Manufacturer #: WPW10119828
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
$11.80
In Stock
Shift Actuator - 6 Pin
PartSelect #: PS11769864
Manufacturer #: W10913953
This 6-pin shift actuator is an authentic OEM part supplied directly by the manufacturer for use in washing machines. The shift actuator is responsible for controlling the movement of the washer trans...
$66.39
In Stock
Questions And Answers for 11022352511
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- 2
- 3
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Janet
August 10, 2021
When I close the lid it wont stop locking and unlocking and wont let me do anything else, I have unpluged the unit and tried plugging back in a day later but same results
For model number 11022352511
Hello Janet, Thank you for the question. Normally this is an indication the Washing Machine Door Lock Assembly is defective that will need to be replaced. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Debra
May 15, 2023
Does this washer have a filter?
For model number 11022352511
Hi Debra, thank you for the question. Yes, your model does have a filter. The part you are looking for is the lint filter, part number PS11750500. We hope this information is useful!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Debra
May 16, 2023
Where is the washing machine filter located?
For model number 11022352511
Hi Debra,
Thank you for your question. The lint filter is located under the basket in the bottom of the outer tub. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
July 9, 2023
ADGITATOR DOES NOT MOVE WHEN WASHING CLOTHES
For model number 11022352511
Hi James, thank you for reaching out. First, you may need to make sure the agitator is not stuck. If that is not causing the issue, then you may need to replace the drive hub kit, part number PS6012095, as it is most likely faulty. Glad to be of assistance!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Albert
January 28, 2024
(a.) When start button is pressed, and dial is set on Normal.
1. the lock light does not come
2. sounds like a little bit of water starts flowing
3. sounds like it wants to start the cycle- abnormal noise Like gears striped) is heard.
(b.) When Dial is set on Rinse and spin:
1.The door locks and light come on .
2. the spin cycle starts
3. it starts to Rinse
4. What could be the issue,? Thank you
For model number 11022352511
Hi Albert, thank you for reaching out. Based on our research, the issue is most probably with the control board, part number PS12347928. It manages the washer's functions such as filling, washing, draining and spinning. We would suggest replacing it to fix the issue. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- 3
- Next >
Common Symptoms of the 11022352511
[Viewing 12 of 12]Will not agitate
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
No hot or cold water
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Water Filling Issues
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Noise on bottom of Washer louder as time went on. 1 1/2 years
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch
... Read more
and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
Read less
Parts Used:
-
Jerry from WALLA WALLA, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set
84 of 113 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hub had warn its grooved teeth off and washer wouldnt agitate
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned
... Read more
it back up and got caught up on laundry. good day when the washer is fixed.
Read less
Parts Used:
-
Allison from RICHFORD, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
44 of 57 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Parts Used:
-
David from BLOOMINGTON, IN
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
38 of 48 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!