Models
>
11016882503
11016882503 Kenmore Washer - Overview
Sections of the 11016882503
[Viewing 10 of 10]Manuals & Care Guides for 11016882503
Click to downloadInstall
Installation Instructions
(3.43MB)
Manual
Owner's Manuals
(1MB)
Manual
Owner's Manuals
(3.66MB)
Manual
Owner's Manuals
(3.65MB)
Keep searches simple, eg. "belt" or "pump".
![Agitator Directional Cogs – Part Number: 80040 Agitator Directional Cogs – Part Number: 80040](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/388034-1-S-Whirlpool-80040-Agitator-Directional-Cogs.jpg)
Agitator Directional Cogs
PartSelect #: PS388034
Manufacturer #: 80040
This kit is used for replacing the agitator directional cogs (Agitator Dogs, Agitator Repair Kit, Washer Agitator Dogs, Agitator Dog Ears). The agitator is what creates the thrusting motion in your wa...
$4.39
In Stock
![Direct Drive Motor Coupling – Part Number: 285753A Direct Drive Motor Coupling – Part Number: 285753A](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/1485646-1-S-Whirlpool-285753A-Direct-Drive-Motor-Coupling.jpg)
Direct Drive Motor Coupling
PartSelect #: PS1485646
Manufacturer #: 285753A
This direct drive motor coupling (Direct Drive Washer Motor Coupling, Motor Coupling, Washer Motor Coupling, Coupling Kit) provides a cushioned connection between the transmission and the motor shaft....
$27.87
In Stock
![Direct Drive Water Pump – Part Number: WP3363394 Direct Drive Water Pump – Part Number: WP3363394](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11741239-1-S-Whirlpool-WP3363394-Direct-Drive-Water-Pump.jpg)
Direct Drive Water Pump
PartSelect #: PS11741239
Manufacturer #: WP3363394
The direct drive drain pump (Whirlpool Direct Drive Washer Pump, Drain Pump, Washer Drain Pump, Water Pump) removes water from the washer during the drain cycle without the use of a belt. The pump is ...
$48.76
In Stock
![Suspension Spring – Part Number: WP63907 Suspension Spring – Part Number: WP63907](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11743345-1-S-Whirlpool-WP63907-Suspension-Spring.jpg)
Suspension Spring
PartSelect #: PS11743345
Manufacturer #: WP63907
The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down or has stretched out and lost its spring, it could c...
$8.00
In Stock
![Clutch Assembly – Part Number: 285785 Clutch Assembly – Part Number: 285785](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/334641-1-S-Whirlpool-285785-Clutch-Assembly.jpg)
Clutch Assembly
PartSelect #: PS334641
Manufacturer #: 285785
A clutch assembly (Clutch, Washer Clutch) is found in your washing machine and is responsible for spinning the basket during the spin cycle. The clutch lining can wear over time. If the clutch lining ...
$27.58
In Stock
![Agitator Bolt – Part Number: WP358237 Agitator Bolt – Part Number: WP358237](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11741866-1-S-Whirlpool-WP358237-Agitator-Bolt.jpg)
Agitator Bolt
PartSelect #: PS11741866
Manufacturer #: WP358237
This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".
$7.04
In Stock
![Washer Lid Switch – Part Number: WP8318084 Washer Lid Switch – Part Number: WP8318084](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11745957-1-S-Whirlpool-WP8318084-Washer-Lid-Switch.jpg)
Washer Lid Switch
PartSelect #: PS11745957
Manufacturer #: WP8318084
This part is found in your washer. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the green grounding wire. If your machine is ...
$45.97
In Stock
![Screw, 8/18 x 3/8 – Part Number: WP90767 Screw, 8/18 x 3/8 – Part Number: WP90767](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11746840-1-S-Whirlpool-WP90767-Screw-8-18-x-3-8.jpg)
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
In Stock
![Tub Wear Pads - Package of 3 – Part Number: 285744 Tub Wear Pads - Package of 3 – Part Number: 285744](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/334620-1-S-Whirlpool-285744-Tub-Wear-Pads-Package-of-3.jpg)
Tub Wear Pads - Package of 3
PartSelect #: PS334620
Manufacturer #: 285744
This package of pads contains three tub wear pads.
$16.85
In Stock
![Hose Clamp – Part Number: WP596669 Hose Clamp – Part Number: WP596669](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11743008-1-S-Whirlpool-WP596669-Hose-Clamp.jpg)
Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.80
In Stock
![Leveling Spring – Part Number: 8316845 Leveling Spring – Part Number: 8316845](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/394983-1-S-Whirlpool-8316845-Leveling-Spring.jpg)
Leveling Spring
PartSelect #: PS394983
Manufacturer #: 8316845
This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.
$11.14
In Stock
![Centerpost Gasket – Part Number: W10814296 Centerpost Gasket – Part Number: W10814296](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11723081-1-S-Whirlpool-W10814296-Centerpost-Gasket.jpg)
Centerpost Gasket
PartSelect #: PS11723081
Manufacturer #: W10814296
This part may also be referred to as a main outer tub seal. This part prevents leaking from the bottom of the tub. The gasket is approximately 2 inches in diameter to the outer edge, black in color, a...
$5.76
In Stock
Questions And Answers for 11016882503
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
BARBARA
February 8, 2024
What is the capacity of my washer? Thanks
For model number 11016882503
Hi Barbara, thank you for contacting us. Your washer is 3.2 cubic feet. We hope this information is useful!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the 11016882503
[Viewing 16 of 16]Will not agitate
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/388034_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/1485646_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741866_1_S.jpg)
Show All
Leaking
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741239_1_s.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11748248_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11723081_1_S.jpg)
Show All
Spins slowly
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/334641_1_s.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/1485646_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/388034_1_S.jpg)
Show All
Will not drain
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741239_1_s.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/1485646_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11745957_1_S.jpg)
Show All
Will Not Start
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11745957_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/1485646_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11746661_1_s.jpg)
Show All
Burning smell
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/1485646_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/334641_1_s.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11745957_1_S.jpg)
Show All
Spinning Issues
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/1485646_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/334641_1_s.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/388034_1_S.jpg)
Show All
No hot or cold water
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11742194_1_S.jpg)
Show All
Shaking and Moving
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11743345_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/334620_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/394983_1_S.jpg)
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11746095_1_s.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/388034_1_S.jpg)
Show All
Leaks water
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741239_1_s.jpg)
Show All
Marks left on clothes
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/388034_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11741866_1_S.jpg)
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/388034_1_S.jpg)
Show All
Noisy
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/1485646_1_S.jpg)
Show All
Touchpad does not respond
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/1485646_1_S.jpg)
Show All
Lid or door won’t close
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11738874_1_S.jpg)
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No movement from Basket & agitator
The job looked intimidating but turned out to be very easy.
First take off the water pump by removing the two clips that hold it in place. Place a shallow pan under the pump to catch the water that is in the pump and hoses. Open the hose clamps with a pair of pliers or channel locks (better) and slide the hoses off of the water pum ... Read more p.
The motor comes off next. Unplug the electrical connector from the motor and two wires from the capacitor. Remove the two screws holding the clamps in place and then pop off the two clamps. You will need to hold up the motor with one hand while you remove the clamps or it will fall to the floor once the clamps are removed.
One piece of the coupling assemble will be attached to the motor and the other will be attached to the gearcase drive shaft. If you want to clean up the mess created by the shredded rubber center piece of the coupling assembly you will have to take off the motor mounting plate. It is held on by two bolts and removing it makes installing the coupling easier but probably not necessary.
Push the back half of the coupling on to the gearcase drive shaft until the shaft is flush with the face of the coupling. Install the new rubber center piece on to the coupling then re-install the motor mounting plate. Install the other half of the coupling on to the motor shaft and lift the motor up to the coupling. You have to rotate the motor shaft by spinning the fan blades until the coupling lines up so you can slide it into the other half of the coupling. Then just reattach the motor, connectors and water pump in the reverse order of disassembly.
First take off the water pump by removing the two clips that hold it in place. Place a shallow pan under the pump to catch the water that is in the pump and hoses. Open the hose clamps with a pair of pliers or channel locks (better) and slide the hoses off of the water pum ... Read more p.
The motor comes off next. Unplug the electrical connector from the motor and two wires from the capacitor. Remove the two screws holding the clamps in place and then pop off the two clamps. You will need to hold up the motor with one hand while you remove the clamps or it will fall to the floor once the clamps are removed.
One piece of the coupling assemble will be attached to the motor and the other will be attached to the gearcase drive shaft. If you want to clean up the mess created by the shredded rubber center piece of the coupling assembly you will have to take off the motor mounting plate. It is held on by two bolts and removing it makes installing the coupling easier but probably not necessary.
Push the back half of the coupling on to the gearcase drive shaft until the shaft is flush with the face of the coupling. Install the new rubber center piece on to the coupling then re-install the motor mounting plate. Install the other half of the coupling on to the motor shaft and lift the motor up to the coupling. You have to rotate the motor shaft by spinning the fan blades until the coupling lines up so you can slide it into the other half of the coupling. Then just reattach the motor, connectors and water pump in the reverse order of disassembly.
Read less
Parts Used:
-
Jeff from Wayne, NJ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
1090 of 1170 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer wouldn't agitate
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
Slip the new cogs into the underside of the cup, and slide the cup back down in the a ... Read more gitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out).
Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
Slip the new cogs into the underside of the cup, and slide the cup back down in the a ... Read more gitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out).
Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
Read less
Parts Used:
-
mike from Kent, WA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
931 of 1007 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
spin cycle did not engage
researched potential causes, found cluch dust under the washer and determined that it wouldn't engage because clutch was too worn. ordered the assembly, removed agitator from inside the tub as it is connected to the gear shaft, turned washer on it's back for access to motor, unattached the direct drive water pump from the motor drive, unb
... Read more
olted the 3 gearcase mounting bolts and took the entire gearcase, shaft, motor, etc... together, out from under the washtub. the clutch slides off the gearshaft with a little fidgeting and the new assembly is easily installed where the previous was. put everything back together... then... spin spin! worked perfectly
Read less
Parts Used:
-
Andrew from SLC, UT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Socket set
487 of 520 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!