Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This is a genuine Whirlpool replacement part. This drawer hanger is for refrigerators and its job is to support the drawer. It is approximately 11 inches in length, and is made of plastic.
This track is a genuine OEM replacement part for your refrigerator. It is made of white plastic. The track supports the shelf within your fridge, and can be snapped in and out of place, which makes re...
This is an LED light bulb for various models of refrigerators. This LED light bulb features an E14 socket and requires 120V to operate properly. If your current refrigerator light bulb is burnt out, n...
This temperature sensor is for refrigerators.
The temperature sensor senses the temperature inside the refrigerator and sends information to the electronic control.
Unplug the refrigerator and s...
This crisper drawer roller is for refrigerators. Crisper drawer roller lets the drawer glide smoothly. Wear work gloves to protect your hands when installing this part.
$9.90
In Stock
Questions And Answers for 10679403410
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
K
January 30, 2020
Where can I buy the bottom plastic plate for the smaller door, right side for rig.
For model number 10679403410
Hi k. I am assuming you mean the bottom bin on the door. This would be part number PS11752907 on the door with only two bins. Thank you for your question and good luck with your repair.
there is moisture build up on vegetables, we have to take them out every day to dry out, please tell me how to solve this problem
For model number 10679403410
Hello Ramesh, Thank you for your inquiry. This is usually caused by the door seals not sealing properly, or warm air being let in. Check first to see if the door is shutting properly as if one of the hinges is faulty, the door may be not closing all the way. Check the gaskets to see if there is any air escaping. You can run a piece of paper along the edge of the gasket. Good luck with your repair.
Can I get an entire right hand door replacement, or the kick plate for the bottom of the right hand door
For model number 10679403410
Hello Devon, thank you for reaching out. The right side door for your model is part number PS3650861. If you are looking for the bottom kick plate, then its part number is PS11753588. Please reach out to customer service if you need help placing an order!
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only
... Read moreswing down so far and was not intended to be removed. Saved me from breaking that plastic cover's tabs. This home repair saved me more than 5 times the cost of hiring a professional to do it. Very happy homeowner.