Maytag Dishwasher Valves

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Maytag Appliance Parts
Shop By Part Type

Popular Maytag Dishwasher Valves

Videos!
Your Price
$64.14
  In Stock
Maytag Dishwasher INLET VALVE
★★★★★
★★★★★
28 Reviews
PartSelect Number PS12578165
Manufacturer Part Number W11175771
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Will not fill with water
  • See more...
Installation Instructions
Melissa from AIKEN, SC
Inlet valve wasn't working
Put thread tape on threads. Screwed water hose to part. Pushed hose onto part. Pushed electric clip to part. Screwed part onto washer. Done Read more...
Videos!
Your Price
$61.64
  In Stock
Maytag Dishwasher Water Inlet Valve
★★★★★
★★★★★
14 Reviews
PartSelect Number PS8760080
Manufacturer Part Number W10648041
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Will not fill with water
  • See more...
Installation Instructions
Bruce from GRANDVIEW, MO
washer filled in when off..
replaced the valve Read more...
Videos!
Your Price
$55.57
  In Stock
Maytag Dishwasher Water Inlet Valve
★★★★★
★★★★★
15 Reviews
PartSelect Number PS11730996
Manufacturer Part Number W10844024
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed. NOTE: As per the manufacture this part has been updated from the original part. It may be a different color, and you may need to order an elbow (# W10685193) for the new designed valve to work.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not draining
  • See more...
Installation Instructions
David from Lexington, NC
Inlet valve was leaking from crack in brass fitting
Removed the lower panels from beneath the dishwasher door. 4 screws. Turned off the water.

Removed one screw holding the inlet valve to the side rail of the dishwasher. It was attached to the hot water line and then the washer water input line. Removed the electrical connector..Pull straight off, and use a pair of pliers to open the squeeze clamp on the washer hose. The hot water supply hose has a brass fitting to loosen and remove.

Replaced the inlet valve, reconnected the electrical and also replaced the hot water line from under the sink to the washer. Used a new braided 5' hose with fittings. Used teflon tape on the screws and did not over tighten the brass fittings.

Turned on the hot water supply and checked for leaks. Operated the washer and checked for leaks. Replaced the lower covers. Read more...
Videos!
Your Price
$49.86
  In Stock
Maytag Dishwasher Drain Check Valve with O-Ring
★★★★★
★★★★★
2 Reviews
PartSelect Number PS382661
Manufacturer Part Number 675238
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not draining
  • See more...
Installation Instructions
Lewis from Portsmouth, NH
Dishwasher Not Draining
Ordered both drain & wash impeller kit and the drain check valve with o-ring. Decided to test the cheaper drain check valve first. Pulled dishwasher out from wall & adjacent cabinetry; removed drain hose from disposer and drained as much water as possible; "jacked" side of dishwasher to gain access to drain hose and drain check valve; used pliers to remove hose clamp; placed flat pan underneath to catch remaining water drainage; unscrewed drain check valve; tested under bathroom faucet--determined faulty; replaced with the new one, restored connections, reset dishwasher in proper location; voila--fixed! Plan to return the unneeded impeller kit. Read more...

Related Maytag Dishwasher Parts

Back to Top