MTD Snow Blower Parts

Shear Pin, .25 – Part Number: 738-04124A

Your Price

$3.99

PartSelect Number PS9110822

Manufacturer Part Number 738-04124A

This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the auger and auger shaft, which are the rotating blades, and to protect more valuable components such as the transmission.If the snow is causing excessive force or there is a jam within the auger and connected housing,it will cause the shear pin to snap, effectively stopping the rotation of the auger, while the auger shaft and gears will continue turning. If the shear pin snaps, snow will simply build up on the outside of the auger housing, since the auger will no longer spin. This shear pin has a .25-inch diameter, and 1.5-inch length and is sold individually. Most augers have a pin on each side, so you may need to purchase more than one, and it is also recommended that you carry spare pins in case of a future breakage.

Speed Selector Cable – Part Number: 946-04396A

Your Price

$19.72

MTD Snow Blower Speed Selector Cable

PartSelect Number PS9166871

Manufacturer Part Number 946-04396A

This speed selector cable is sourced from the original manufacturer and consists of a cable enclosed in an outer protective casing. It connects the control panel to the transmission/drive system of the snow blower, allowing you to adjust and select the speed at which the snow blower moves. When you adjust the speed on the control panel, the cable is activated, and it engages with the transmission to control the snowblower. The speed selector cable can fail over time due to various reasons including fraying from use and exposure to harsh conditions, corrosion, or inadequate lubrication, which causes it to become stiff. If the cable is faulty, your equipment will be unable to move, or stuck at one speed, and the control panel may be unresponsive. Disconnect the faulty cable and route the new cable through the same path. Connect the cable to the control panel and transmission, and secure it with the appropriate fasteners.

Chute Flange Keeper – Part Number: 731-04869A

Your Price

$4.99

MTD Snow Blower Chute Flange Keeper

PartSelect Number PS9104771

Manufacturer Part Number 731-04869A

The chute flange keeper is a genuine OEM replacement part that secures the chute flange on snowblowers. The keeper is made of plastic and fits onto the metal piece, known as the flange, that connects the chute to the blower frame and holds it in place during use. Over time the flange keeper may wear down or fall off and cause the chute flange to fall out of alignment. If you notice that you have difficulties adjusting the direction of the chute and you hear rattling during use, then this is a sign that the flange keeper is no longer properly attached. Before positioning the new keeper, clear off any dirt or debris in the area. Use a pair of pliers to fit the keeper on and align the holes on the flange keeper with the holes on the chute before securing it.

Carriage Bolt, 5/16-18 x .75 – Part Number: 710-0451

Your Price

$3.99

MTD Snow Blower Carriage Bolt, 5/16-18 x .75

PartSelect Number PS10001568

Manufacturer Part Number 710-0451

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

Nut, Flange Lock, 5/16-18, Grf – Part Number: 712-04063

Your Price

$3.99

MTD Snow Blower Nut, Flange Lock, 5/16-18, Grf

PartSelect Number PS9092936

Manufacturer Part Number 712-04063

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

Chute Flange Keeper – Part Number: 731-0851A

Your Price

$4.99

MTD Snow Blower Chute Flange Keeper

★★★★★

1 Review

PartSelect Number PS10005747

Manufacturer Part Number 731-0851A

This chute flange keeper is sourced from the original equipment manufacturer for use in snowblowers. The plastic keeper allows the snowblower chute to pivot, and secures the flange that connects the chute to the blower frame and holds it in place during use. Over time the flange keeper can break or fall off, which causes the chute to dislodge or shift from its position. If you notice that debris is discharged in the wrong direction, and you have difficulties adjusting the chute then this is a sign that the flange keeper is no longer functioning as it should. Clean the chute flange and surrounding area before placing the new keeper on. Use a pair of pliers to align the the holes on the flange keeper with the holes on the chute and lock it in place.

Carburetor Gasket Plate – Part Number: 751P11897B

Your Price

$3.99

MTD Snow Blower Carburetor Gasket Plate

PartSelect Number PS17016727

Manufacturer Part Number 751P11897B

Carburetor Gasket Plate

Installation Instructions

Jason from PEABODY, MA

Carburetor rebuild

I can’t complete this easy repair because partselect sent the wrong part and has not responded to customer service requests. Please contact me- jtandree@gmail.com Read more...

Steering Triggers – Part Number: 731-04954

Your Price

$5.67

MTD Snow Blower Steering Triggers

★★★★★

1 Review

PartSelect Number PS9104626

Manufacturer Part Number 731-04954

Shear Bolt 5/16-18 x 1.5 – Part Number: 710-0890A

Your Price

$3.99

MTD Snow Blower Shear Bolt 5/16-18 x 1.5

★★★★★

1 Review

PartSelect Number PS10001820

Manufacturer Part Number 710-0890A

This is a shear bolt, also known as a snap-off bolt. This is a fastener designed to break under a specific amount of pressure and protect the machine it is installed on from that excessive load. In lawn equipment, the shear bolts typically connect the auger or blade to the drive shaft. Therefore, if the bolt snaps, the auger gets jammed and cannot rotate so that it will not damage the rest of the unit. This bolt has a diameter of 5/16 inches, with 18 threads per inch, and is 1.5 inches long. To remove the shear bolt from your machine, you need to turn the power off first. With pliers or a wrench, grip onto the broken end of the bolt and twist it gently out of its hole. If it is stuck, you may need to coat the bolt with a penetrating oil or tap the bolt out with a mallet. Since this authentic OEM part is sold individually, refer to your instruction manual so that you can purchase the correct number of bolts for your machine.