LG Dishwasher Motors

Shop By Part Type

Popular LG Dishwasher Motors

Your Price

$40.50

LG Dishwasher Diverter Motor - 120V 60Hz

★★★★★

6 Reviews

PartSelect Number PS3579323

Manufacturer Part Number 4681ED3001D

This diverter motor, or stepper motor, controls the movement of the spray arms in your dishwasher. It directs water between the drain pump and the spray arms by turning a check valve inside the pump, managing the flow of water to these spray arms. This diverter motor runs on 120 volts and 60 Hz. When this motor fails, the dishwasher will not wash or drain properly. Please keep in mind that this genuine OEM replacement part is sold separately from the spray arms.

Fixes these symptoms

Not cleaning dishes properly
See more...

Installation Instructions

Glen from LINESVILLE, PA

Dishwasher gave the Ne code

When I turned the dishwasher over I discovered the PS3579323 diverter motor had failed due to a leak around the PS3536016 valve, check. No use replacing the diverter motor without fixing the leak so I turned the machine back over and disassembled the spray arms and top of the pump cover which reveled the case assy and the valve, check. Upon removal of the valve, check I discovered hair wrapped around it which compromised the MO31 packing and caused the leak. I probably could have just cleaned out the hair and reassembled it but because my installation is a bit of a pain I elected to change the case assy (because of a slight depression where the packing sets) the M031 packing, the MO25 valve, check, and the MO35 pump gasket. After that was accomplished I turned the machine upside down and replaced the MO26 diverter motor and reinstalled the dishwasher. End result: Ne code cleared, no leaks and now the dishes are clean on the top shelf and the wife is happy. There are great instruction videos on YouTube. Good luck! Read more...

Your Price

$176.08

LG Dishwasher Circulation Motor Assembly

★★★★★

3 Reviews

PartSelect Number PS3579321

Manufacturer Part Number 4681ED1004B

Fixes these symptoms

Noisy
Not cleaning dishes properly
See more...

Installation Instructions

Doug from NEWPORT NEWS, VA

Dishwasher was noisy. PartsDirect suggested replacing circ pump.

Relocated dishwasher to garage and set it up on a table (easier on back having it elevated). Connected temporary water supply, drained to a bucket.

Removed pump, and found it severely corroded, indicating leakage from pump shaft seal in sump. Inspection of seal revealed excessive wear, requiring sump replacement (there is no way to replace just the pump seal). I have photos of old pump & sump, but I don't see any way to upload them.

Removed sump from dishwasher with all components attached, swapped components over to new sump, reinstalled sump (with new sump gasket) and started dishwasher to check for leaks. The heater was the most difficult component to swap. Reinstalling the sump assembly was tricky.

Reinstalled dishwasher into kitchen cabinet. Read more...