Official Kenmore Laundry Accessories Parts

Videos!

Your Price

$5.04

Kenmore Laundry Accessories Door Catch Kit

★★★★★

125 Reviews

PartSelect Number PS334230

Manufacturer Part Number 279570

This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, while the catch is mounted on the dryer door. These two parts work together to keep your dryer door closed. The catch holds the door strike to keep the door closed during the drying cycle. If the door does not latch closed, you won’t be able to start a drying cycle. If this part is malfunctioning, you may not be able to open or close your door. In some instances, it may seem like your door is closing, but if it is not latching properly you won’t be able to start your drying cycle. You should replace this part as soon as it’s malfunctioning. Your dryer may run even though the latch is malfunctioning, but it is unsafe if the dryer continues to run while the door is open. This replacement part features 1 door latch kit which includes 2 strikes, 3 catches, and a set of instructions. This model is constructed of plastic and metal, and comes in white/silver.

Fixes these symptoms

Door Pops Open
Door won’t close
Lid or door won’t close
See more...

Installation Instructions

Terri from Saint Augustine, FL

Door Catch part had fallen out,/ was missing

Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source. Read more...

Touch-Up Paint - White – Part Number: 72017

Your Price

$8.00

Kenmore Laundry Accessories Touch-Up Paint - White

★★★★★

1 Review

PartSelect Number PS385132

Manufacturer Part Number 72017

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.

Installation Instructions

Michelle from Richardson, TX

Scratches in Surface

This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. Read more...

Your Price

$8.00

Kenmore Laundry Accessories SEAL-SHAFT

★★★★★

1 Review

PartSelect Number PS11746864

Manufacturer Part Number WP91939

This OEM upper transmission shaft seal, also known as the oil seal, is found in your washers and dryers. It acts as a barrier to prevent water from leaking into the transmission assembly. It measures 1/2 inch in height with a 1-inch diameter, and is located at the top of the transmission shaft where it enters the tub. Signs of a broken seal include water stains, dampness, or pooling of water beneath the appliance. If left unreplaced, it can result in water damage to internal components, along with the potential for corrosion, mold growth, and unpleasant odors. To remove the shaft seal, consult your user guide for specific instructions. Start by shutting off the power and water supply. Remove the water hoses and drain hose, being cautious of any water that may leak out. You will need tools like a putty knife, screwdriver, nut driver, pliers, spanner, plastic mallet, and a socket set. Open the lid and proceed to remove the agitator assembly, detach the control panel, and disconnect any necessary wiring harnesses. Remove the cabinet and water break. Continue disassembling the inner tub until you can lift it out of the appliance and tilt it onto its back, propping it up with a block. This will allow access to the transmission assembly from beneath the appliance. Remove the mounting fasteners on the pump to reach the motor assembly. Once the motor assembly is out, further disassemble it to access the basket drive. The seal can be removed from the top of the shaft of the drive tube, below the thrust ring. When purchasing parts for your appliance repair, it is important to remember that your appliance uses various seals and gaskets. It is important to ensure that you purchase the correct part when making repairs.

Fixes these symptoms

Leaking
See more...

Installation Instructions

Al from OCEAN, NJ

drive shaft leaking

Washer was leaking -- in part from hoses that had loosened over time due to unbalanced loads and age, and partly from a worn pump -- and not agitating/spinning properly. Fixed hoses, replaced pump and clutch. Unfortunately, when I pulled apart direct drive to replace clutch, the drive shaft started leaking because old seals worn and compromised on disassembly. Have to give credit where due -- YouTube invaluable here -- pulled and disassembled drive shaft, removed old seals, replaced and reassembled. Time consuming, but if you keep track of where things go, not too bad. 3 things I wish I knew in advance: (1) for an old washer you definitely need a spanner nut wrench (like 15-25 bucks online) to remove the spanner nut so you can pull the basket and get to the seals -- no wrench/pliers/vise substitute will do the trick; (2) the shaft seals have metal washers inside the rubber/plastic -- when you're removing the old seals, you might need to chisel (hammer and small flat head screwdriver) the old seals out instead of just pulling out the corroded rubber which will leave the old metal behind; (3) if your time is valuable, try to diagnose all the likely sources of your problem and buy the parts to repair at once rather than doing piecemeal like me. Took me 2 weeks and two complete tear downs to finish a repair that should have taken me an afternoon. I love my local Appliance Parts guy -- he's knowledgeable and usu. has what I need or can get it fast and I like supporting local brick and mortar -- but if time is important to you, taking advantage of online companies that allow you to return what you don't use may save you time. Read more...

Videos!

Basket Drive Assembly with Clutch – Part Number: W10820043

Your Price

$155.28

Kenmore Laundry Accessories Basket Drive Assembly with Clutch

★★★★★

1 Review

PartSelect Number PS11723156

Manufacturer Part Number W10820043

This basket drive assembly is for washers. Basket drive assembly sits on top of the transmission shaft and houses the spin basket brake mechanism. The basket drive spins to rotate the basket during the spin cycle.

Fixes these symptoms

Spins slowly
See more...

Installation Instructions

Bob from East Palestine, OH

The motor turned with loud noise ,but nothing else worked

I used "Emley's Cheap and Easy Repair" book to remove,install and reassemble the machine.
A lot of time was used to clean the filthy tub and basket.
While replacing the broken motor coupling I decided to replace some of the seals.
PartSelect got the ordered parts to me in a couple of days.
I wouldn't hesitate to do the job again. Read more...

Spin Pinion Seal – Part Number: WP356427

Your Price

$11.14

Kenmore Laundry Accessories Spin Pinion Seal

PartSelect Number PS11741857

Manufacturer Part Number WP356427

This seal is for the top of basket drive tube shaft.

Fixes these symptoms

Leaking
See more...

Spray Paint - 12 oz. - White – Part Number: 350930

Your Price

$22.68

Kenmore Laundry Accessories Spray Paint - 12 oz. - White

★★★★★

2 Reviews

PartSelect Number PS347819

Manufacturer Part Number 350930

Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a protective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.

Installation Instructions

Howard from Boynton Beach, FL

Both outside door handles turned very beige

Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you Read more...

Your Price

$53.07

Kenmore Laundry Accessories Clutch Lining Kit

★★★★★

3 Reviews

PartSelect Number PS334642

Manufacturer Part Number 285790

This kit comes with springs, hardware, and brake lining.

Fixes these symptoms

Spins slowly
Will not agitate
See more...

Installation Instructions

Adam from Lehi, UT

Agitator had a terrible ratcheting sound when running in free-wheel mode during spin cycle.

Removed the gearbox from the drum and removed the direct drive motor from the gearbox. Disassembled gearbox and drained gear oil. Rebuilt the neutral drive assembly with the ordered parts. Cleaned sealing surfaces. Filled gearbox with new gear oil. Sealed and re-installed the top cover to the gearbox. Reattached motor and then reinstalled assembly to drum and clutch (installed new clutch lining at this time as well). Read more...

Your Price

$7.43

Kenmore Laundry Accessories RING-WIRE

PartSelect Number PS11773107

Manufacturer Part Number W11033823

This is part of the Basket Drive and found under the Brake Lining parts.

Videos!

Door Handle - White – Part Number: WP3405184

Your Price

$49.16

Kenmore Laundry Accessories Door Handle - White

★★★★★

3 Reviews

PartSelect Number PS11741690

Manufacturer Part Number WP3405184

This is a door handle for the door of your dryer. It fastens to your appliance in order to allow you an easy way to firmly pull and push the door open and closed. The most common reason for needing to replace this part is if your current one has warped over time and may be broken. This part is just over 5 inches long, and 2.5 inches wide.

Installation Instructions

steve from carol stream, IL

over-all different problems with esate.

Very easy to replace. Read more...