Hotpoint Washer Hoses and Tubes
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Hotpoint Washer Hoses and Tubes
Your Price
$27.09
In Stock
Hotpoint Washer Drain Hose
PartSelect Number PS890597
Manufacturer Part Number WH41X10096
The drain hose is black in color and made of flexible material. This is a part for your top-load washer. The hose measures 57 inches long. This part moves the water out of the washer and into the drain. If this parts cracks or becomes damaged it will leak during the drain cycle of your wash and you may find water on the floor. To access the hose, you will need to move the washer away from the wall to get to the back of the appliance. There will be two screws holding it in place that will need to be removed.
Fixes these symptoms
- Leaking
- Will not drain
- See more...
Installation Instructions
Anthonie from Beale AFB, CA
Old Hose Had A Leak
First I removed the screws that held the hose drain hose clip in place. Removed the damaged hose. Placed the new drain hose clip at the end of the new drain hose. Re-inserted back in hole, pushed in hose to necessary depth then tighted screws, Very easy and painless.
Read more...
Your Price
$16.95
In Stock
Hotpoint Washer Pump to Tub Inlet Drain Hose
2. Removed the 2 bolts holding the Pump/Motor assembly to the machine.
3. Removed both hose clamps on the Pump/Motor assembly and removed Pump.
4. Attached the new drain inlet hose to the pump and then to the tub with the original hose clamps.
5. Attached the drain hose to the pump and then plugged in the 2 wires for the pump.
6. Plugged in the washing machine and everything worked.
NOTES:
1. Hardest part was working with hose clamps (spring type clamps) in the tight space under the machine.
2. Easier to fix since I pulled machine apart a few days before - removing the clog in the pump/motor assembly only to get everything back together to find out that the motor was dead. Still well worth the time and effort due to not having to go out and buy a new Machine... Read more...
PartSelect Number PS11721808
Manufacturer Part Number WH41X22935
This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Gerald from Midlothian, VA
Washing Machine was not draining water from tub.
1. Drained the wash tub by taking the drain hose from the back of the washing machine and dropping it below the tub - water flowed out of hose a lot easier than trying to suck water out of tub using a pump (tried this on the first time I tried to fix washer). (Washing machine on 2nd floor of house and didn't want water running on floor)2. Removed the 2 bolts holding the Pump/Motor assembly to the machine.
3. Removed both hose clamps on the Pump/Motor assembly and removed Pump.
4. Attached the new drain inlet hose to the pump and then to the tub with the original hose clamps.
5. Attached the drain hose to the pump and then plugged in the 2 wires for the pump.
6. Plugged in the washing machine and everything worked.
NOTES:
1. Hardest part was working with hose clamps (spring type clamps) in the tight space under the machine.
2. Easier to fix since I pulled machine apart a few days before - removing the clog in the pump/motor assembly only to get everything back together to find out that the motor was dead. Still well worth the time and effort due to not having to go out and buy a new Machine... Read more...
Your Price
$13.08
In Stock
Hotpoint Washer Water Pressure Switch Hose
PartSelect Number PS272183
Manufacturer Part Number WH41X365
This is a water pressure switch hose, also known as the air dome tube, for your washer. It is made of clear plastic and is sold individually. The hose transports water to your water pressure switch, so the switch can control how much water enters the washer during a cycle. If your washer will not fill up with water, or if water continues to fill the tub even after it is full, you may have a damaged water pressure switch hose. Inspect the hose for cracks and leaks, and if the hose is damaged you will need to replace it.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Angie from Saint Louis, MO
washer was overflowing-- not registering that the tub was full
I replaced both the tube and the pressure switch and still no luck. turns out that i didn't need either part. the little box that the tube hooks on to at the bottom left of the tub had a clog in it. we disconnected the tube from the switch and just blew through it. the clog broke loose and my washer works again!! decided that i was leaving the new parts on the machine. one less thing to worry about in the future.... ????
Read more...
Your Price
$12.96
In Stock
Hotpoint Washer Water Fill Nozzle
personnel at part select were very knowledgable about detailed part and the overnight service was right on time.
I would recommend part select for your next appliance parts needs. Read more...
PartSelect Number PS756806
Manufacturer Part Number WH41X10077
This part is the replacement water fill nozzle for your washer. It is white and tan in color, made of plastic, and is approximately 7 inches long and 4 inches wide. The water fill nozzle is also known as the water inlet assembly and directs the fill water into the tub. Over time the nozzle can become cracked and damaged, and this can cause it to leak. A damaged nozzle will need to be replaced. Be sure to disconnect the water supply to the washer before you begin this repair. You should also determine if any of the other parts that transport water into the washer are leaking, including the water inlet hose, and if they need to be repaired as well. This part is sold individually and is a genuine OEM part.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Paul from Talihina, OK
Water leaking from filler hose outside of tub
removed washer front panel, top panel to access the water fill spout and hose. Disconnected and replaced.personnel at part select were very knowledgable about detailed part and the overnight service was right on time.
I would recommend part select for your next appliance parts needs. Read more...
Your Price
$12.75
On Order
Hotpoint Washer HOSE DRAIN Assembly
PartSelect Number PS11763295
Manufacturer Part Number WH41X25457
Fixes these symptoms
- Leaking
- See more...
Your Price
$15.89
In Stock
Hotpoint Washer Hose Clamp Kit
PartSelect Number PS270806
Manufacturer Part Number WH1X2036
This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of the two is 1 inch in diameter while the larger one is 2 inches in diameter. The hose clamps secure the end of the water hose in place to prevent the hose from leaking. If you notice leaking from the hose of your appliance, you may need to replace this kit. Protect your hands with work gloves during this repair to avoid injury.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Richard from Garden City, NY
washer had heavy wet clothes left after spin cycle
The trick is to pull the front cover off by using a putty knife .slide it under the cover at both front corners.it will click on each corner.then pull front cover off .lift off the bottom catch hooks.look for the pump on the bottom right side.unplug the wite connector .take 2-5/16 bolts out holding the bracket.then grab a pliers .squeeze the hose clamps and pull the 2 hoses off.assemble new pump.
Read more...
Your Price
$29.13
In Stock
Hotpoint Washer 2PK-POLYMER COATED 4'HOS
Needed the wrench because the old hoses were tight. Only tightened the new hoses a little with the wrench. Read more...
PartSelect Number PS2353277
Manufacturer Part Number PM14X10005
Installation Instructions
Fernando from Chester, NY
Needed to change old hoses-7 years old.
Had to shut off the water valves and move the washer. Needed the wrench because the old hoses were tight. Only tightened the new hoses a little with the wrench. Read more...
Your Price
$43.88
In Stock
Hotpoint Washer Drain Hose Extension with Adapter and Clamp
PartSelect Number PS273704
Manufacturer Part Number WH49X301
Your Price
$90.07
Special Order
Hotpoint Washer HOSE DRAIN
PartSelect Number PS272142
Manufacturer Part Number WH41X324
Installation Instructions
Leigh J. from Aurora, IL
Water Leak
There was a hose clamp that needed to come off and put back on the new hose, and POOF....back in business again!
Read more...
Your Price
$37.65
Special Order
