Hedge Trimmer Starters

Hedge Trimmer Spring & Container This OEM spring, also known as a recoil or rewind spring, is housed in a container and is used to retract the starter rope on various lawn equipment models. Over time and through use, the spring will eventually lose its tension, and will break. If your starter rope has no resistance when pulling it, the starter spring is likely broken. Measuring at approx. 3-inches by 3-inches, this spring is suitable for use with a variety of lawn equipment models and is sold individually.

Hedge Trimmer Rope (3 ft.) The chainsaw starter rope is a three-foot-long white rope that is approved by the original equipment manufacturer, and which wraps around the recoil pulley and is pulled to start the engine. Installation is rated as "Easy" by customers and requires a screw driver, pliers, and torx screwdriver. If the rope breaks it should be replaced. Refer to your make, model and diagram to ensure this rope is right for your machine.

Hedge Trimmer Starter Pawl Bridge

★★★★★

★★★★★

2 Reviews

The Starter Pawl bridge provides the resistance needed for the starter rope to start the trimming engine. It is an OEM part that attaches inside the recoil assembly. If broken due to weaar or fatigue, the engine will not engaged when the rope is pulled, and the part should be replaced. Installation is rated as easy and requires a screwdrvier, pliers and nutdriver. Refer to your make, model and diagram to check if this part is correct. This part is metal, individually sold, and comes in gold.

Hedge Trimmer Recoil Starter Asy

Hedge Trimmer Rope-Starter

Hedge Trimmer Drum, Starter

Hedge Trimmer Recoil Starter Assembly

Hedge Trimmer Starter Pawl

★★★★★

★★★★★

1 Review

Hedge Trimmer Spring-Rewind

Hedge Trimmer Starter Pawl Assembly