Official Gibson Air Conditioner Parts

Evaporator Thermistor Sensor – Part Number: 5304471383

Your Price

$32.55

Gibson Air Conditioner Evaporator Thermistor Sensor

★★★★★

1 Review

PartSelect Number PS2359468

Manufacturer Part Number 5304471383

This evaporator thermistor sensor in your air conditioner measures the temperature of the evaporator coil and adjusts the cooling process accordingly. It is typically attached to the evaporator coil, which cools the air that passes through your air conditioner. If the sensor is broken, your air conditioner may have inconsistent cooling, fail to reach the desired temperature, or frequently turn on and off. An error code on the display could also indicate a problem. A faulty sensor can lead to inefficient energy usage. To remove the sensor, disconnect the wiring by gently releasing its mechanism and remove any mounting bracket, screws, or clips. Please note that the OEM evaporator thermistor sensor is sold separately from the evaporator coil.

Videos!

Door Shelf End Cap - Right Side – Part Number: 5303323480

Your Price

$23.14

Gibson Air Conditioner Door Shelf End Cap - Right Side

★★★★★

3 Reviews

PartSelect Number PS467698

Manufacturer Part Number 5303323480

The right-side door shelf end cap is designed for use in your refrigerator. The function of this part is to connect the shelf bar to the refrigerator door, and hold it in place. This part fits the right-side of your refrigerator door shelf, the left-side door shelf end cap is sold separately. This part is made entirely out of plastic, and is white in color. This product measures approximately 1-inch in width by 1-inch in length. Many of our customers have rated this repair as very easy. The only tool you may need is a soft-faced hammer. This is an OEM part sourced directly from the manufacturer.

Installation Instructions

Christopher from Salisbury, NC

The seals on the doors were shot so the refigerader was sweeting.

I started with the freezer door. I lifted the old gasket from the inside edge to get to the hex head screws that attach the plastic inside liner to the outer door. I did not need to start at any one point so I picked a screw and removed it then I worked my way around the door. I was careful to not drop the liner when I removed the last screw. I removed the liner and pulled the old seal out of its seating grove and replaced it with the new seal. Then I used a hair dryer to fix a few places where the seal was deformed from the packing. The heat helped to get the magnetic seal back into the correct shape. I only had one corner to fix the rest of the seal was fine right out of the box. I applyed a little sealer just as the instruction said to do and then reinstalled the linner and new seal. Then I went through the same process for the refrigerator door. Not a hard job just a lot of screws to remove and then put back. The seal its self took about five minutes. Thanks for the parts!

Chris Read more...

Your Price

$15.32

Gibson Air Conditioner PANEL

PartSelect Number PS450202

Manufacturer Part Number 5300126809

Your Price

$171.67

Gibson Air Conditioner RELAY

PartSelect Number PS1533253

Manufacturer Part Number 5304459461

The heater relay controls the operation of the heating coils in a room air conditioner. The heater relay acts as a bridge between the thermostat and the heater, allowing the low voltage thermostat to control the heater. It is a standard magnetic relay with low voltage flowing through a coil to create a magnetic field. This magnetic field pulls down a piece of metal that connects both sides of the high-voltage circuit, usually 120V or 240v. Closing the circuit allows high-voltage to power the fan and compressor motors. If your air conditioner is not blowing air properly, the fan will not start, or you find the heater coils have a buildup of frost on them, the issue could be that your heater relay is faulty. Disconnect the power from your room air conditioner before installing this part.

Your Price

$102.74

Gibson Air Conditioner FAN BLADE

★★★★★

1 Review

PartSelect Number PS2364358

Manufacturer Part Number 5304472356

This part is a fan blade manufactured to fit on the condenser motor shaft of an air conditioner. The function of this part is to circulate air over the condenser to cool the refrigerant before it enters the evaporator. Be sure to disconnect the power to the air conditioner before doing this repair to ensure the fan does not engage while being replaced. It is recommended to check the fan motor while the fan blade is off. This is an authentic OEM part that is sourced from the genuine manufacturer.

Fixes these symptoms

Noisy
See more...

Your Price

$15.32

Gibson Air Conditioner FILTER-AIR

PartSelect Number PS16221570

Manufacturer Part Number 5304525534

This is an air filter for air conditioners and is used to ensure that dirt, dust, and different particles do not spread in the air of your room or home. It purifies and filters debris for cleaner and healthier air. When the filter does this it gets filled with dirty particles and it can affect the efficiency of the air conditioner. If the air filter is not changed, then air flow will decrease and it can start to spread polluted, dirty air. By replacing this part, issues of air flow are solved. This part is 1 x 18 x 22 inches long and it weighs 3.2 ounces. For safety reasons, make sure to turn off air conditioner before beginning this installation project.

Installation Instructions

Don from Tomball,, TX

Fan blade broken when purchased Vibration very bad

Removed Window Air Conditioner from box purchased New. Plastic Fan Blade was broken when purchased and Appliance store would not repair. Second phase removed cover from the fan area removed and replaced fan blade replaced cover and reinstalled unit into the window case. Read more...