Dishwasher Doors
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Dishwasher Doors
Your Price
$5.04
In Stock
Dishwasher Door Catch Kit
PartSelect Number PS334230
Manufacturer Part Number 279570
This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, while the catch is mounted on the dryer door. These two parts work together to keep your dryer door closed. The catch holds the door strike to keep the door closed during the drying cycle. If the door does not latch closed, you won’t be able to start a drying cycle. If this part is malfunctioning, you may not be able to open or close your door. In some instances, it may seem like your door is closing, but if it is not latching properly you won’t be able to start your drying cycle. You should replace this part as soon as it’s malfunctioning. Your dryer may run even though the latch is malfunctioning, but it is unsafe if the dryer continues to run while the door is open. This replacement part features 1 door latch kit which includes 2 strikes, 3 catches, and a set of instructions. This model is constructed of plastic and metal, and comes in white/silver.
Fixes these symptoms
- Door Pops Open
- Door won’t close
- Lid or door won’t close
- See more...
Installation Instructions
Terri from Saint Augustine, FL
Door Catch part had fallen out,/ was missing
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.
Read more...
Your Price
$86.06
In Stock
Dishwasher Door Switches and Holder Assembly
remove the four wire conections and replace with new new switch Read more...
PartSelect Number PS2099645
Manufacturer Part Number 99002254
This part senses when the dishwasher door is closed so the cycle can start, and prevents it from starting if the door is not closed. If the dishwasher will not start or will not close, you may need to replace the door switches and holder assembly, also known as the door latch assembly. The dishwasher will not start if this part is defective. It includes two switches and the holder, this part does not include the handle or screws. Tools needed are T20 torx driver, needle nose pliers, and 1/4 inch nut driver. This is a genuine OEM part that is sourced directly from the manufacturer.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Will Not Start
- See more...
Installation Instructions
Robert from Johnson, VT
no power
remove the eight screws that hold the inside door cover to gain access to the door switch. remove the four wire conections and replace with new new switch Read more...
Your Price
$25.96
In Stock
Dishwasher Door Cable and Eyelet
1. Using a Philips' head screwdriver, remove the four screws holding the lower front panel (below dishwasher door).
2. Remove the faulty eyelet cable(s) hooked into the springs at one end and the door hinges at the other.
3. Take the new eyelet cables and hook them onto the door hinge on either side. Ensure a secure fit.
4. Guide the eyelet cable around the spinwheel on one side and insert the hooks of the springs into the eyelets.
5. Pull on the springs and insert their hooks into the eyelets of the other cable, ensuring a secure fit.
6. Test the door by opening and closing it a few times to ensure the spring has tension.
7. Replace the lower front panel cover removed in step 1 with its screws. Read more...
PartSelect Number PS263918
Manufacturer Part Number WD7X14
This part is sold individually. It is recommended that both sides are changed when replacing one.
Fixes these symptoms
- Door latch failure
- Door won’t close
- See more...
Installation Instructions
Karthik from Springfield, VA
Dishwasher door became really heavy to operate
Note: This procedure assumes replacement of both eyelet cables. It is recommended that both eyelet cables be replaced at the same time.1. Using a Philips' head screwdriver, remove the four screws holding the lower front panel (below dishwasher door).
2. Remove the faulty eyelet cable(s) hooked into the springs at one end and the door hinges at the other.
3. Take the new eyelet cables and hook them onto the door hinge on either side. Ensure a secure fit.
4. Guide the eyelet cable around the spinwheel on one side and insert the hooks of the springs into the eyelets.
5. Pull on the springs and insert their hooks into the eyelets of the other cable, ensuring a secure fit.
6. Test the door by opening and closing it a few times to ensure the spring has tension.
7. Replace the lower front panel cover removed in step 1 with its screws. Read more...
Your Price
$8.06
In Stock
Dishwasher ATTACH STRIP
PartSelect Number PS8756120
Manufacturer Part Number WD01X10634
Fixes these symptoms
- Door won’t close
- See more...
Your Price
$13.92
In Stock
Dishwasher ATTACH STRIP Right Hand
PartSelect Number PS11771956
Manufacturer Part Number WD01X22836
Fixes these symptoms
- Door won’t close
- See more...
Your Price
$43.13
In Stock
Dishwasher Door Spring Kit
PartSelect Number PS2097003
Manufacturer Part Number 901111
Sold individually.
Fixes these symptoms
- Door latch failure
- Door won’t close
- See more...
Installation Instructions
Rock from Freeport, ME
Right Side Door Springs Broken
With the dishwasher door open remove the 3 srews connecting the top of the dishwasher to the bottom of the kitchen counter top. Remove the lower access panel from the dishwasher and lower the dishwasher about 1/4 inch in the front and back of the dishwasher). Once you have lowered the dishwasher enough slide the dishwasher out about 6 inches (enough to gain access to the door springs on the left and right side). Remove all broken spring parts and replace using new springs. The left side of the door contained a single heavy duty spring and the right side of the door contained a heavy duty and light duty 'helper' spring. I replaced only the right side springs since the left side spring was in excellent condition. When the springs are installed slide the dishwasher back into its original position and raise the dishwasher back up to its original height using the front and back adjustment screws. Replace the 3 screws holding the top of the dishwasher secure to the bottom of the countertop. Ensure that the door opens, closes and latches smoothly and then replace the lower access panel. Job done.
Read more...
Your Price
$149.73
In Stock
Your Price
$47.43
In Stock
Dishwasher Door Panel Insert
PartSelect Number PS11741289
Manufacturer Part Number WP3369769
This panel is reversible, black on one side, white on the other side.
Installation Instructions
stephen from west islip, NY
door insert all scatched up
Took me a while to figure out that the bottom plastic strip is all that holds in the panel. Once it is removed , it pulls out easily When the new panel arrived,just slide it up into the top grooove, and push the bottom strip back into its groove. The front looks like new!
Read more...
Your Price
$220.38
In Stock
Dishwasher Exterior Door Panel with Name Plate - Stainless
PartSelect Number PS11756853
Manufacturer Part Number WPW10629473
This door outer panel is for dishwashers and protects the wiring and components inside the dishwasher door and provides a decorative finish for the front of the dishwasher.
Your Price
$148.75
In Stock
Dishwasher Exterior Door Panel - Stainless
PartSelect Number PS3492862
Manufacturer Part Number 154829007
