Genuine OEM Dethatcher Parts

Your Price

$3.99

PartSelect Number PS8953555

Manufacturer Part Number 3296-42

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

Carriage Bolt, 5/16-18 x .75 – Part Number: 710-0451

Your Price

$3.99

Dethatcher Carriage Bolt, 5/16-18 x .75

PartSelect Number PS10001568

Manufacturer Part Number 710-0451

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

Carburetor Rebuild Kit – Part Number: 495606

Your Price

$36.73

Dethatcher Carburetor Rebuild Kit

★★★★★

1 Review

PartSelect Number PS8983479

Manufacturer Part Number 495606

This is the replacement carburetor kit for your small engine, used for outdoor power equipment. The carburetor rebuild kit includes the float, needle, gaskets, and seals that you need to refurbish your carburetor. The carburetor is essential to proper engine performance so if it is dirty or damaged, it is recommended that you repair it using one of these carb kits. If basic adjustments to your carburetor will not fix your engine issues, it is an indication that you should repair the carburetor with this kit. The parts included in this kit are OEM parts sourced directly from the manufacturer.

Fixes these symptoms

Will Not Start
See more...

Your Price

$5.99

Dethatcher Nut-Hex 5/16-18

PartSelect Number PS9999668

Manufacturer Part Number 703409

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten using a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

Installation Instructions

Steven C from CENTREVILLE, MI

Old diaphragm dried up

Tore carburetor off leaf blower and replaced. To do that require taking off the air cleaner removing the gas tank and all the brackets holding the controls on it. And keeping track of all the screws and Wires that control choke and throttle. I took several photographs. I did not need all the gaskets and jet’s that were included in the kit but it had what I needed. Read more...

Idler Pulley, Flat – Part Number: 539110311

Your Price

$13.69

Dethatcher Idler Pulley, Flat

★★★★★

1 Review

PartSelect Number PS9031679

Manufacturer Part Number 539110311

This is an OEM replacement part for various models of lawn mowers. The Idler Pulley is used to apply tension to the blade belt, allowing the belt to turn. It has an O.D. of approx. 2.75 inches, is made of durable black plastic, and is sold individually, not as part of a kit or assembly. This part will wear through regular use and should be replaced when you notice signs of fatigue or damage. When it is broken, the blades will stop rotating and your lawn mower will not be able to cut grass. You will need a socket set, a wrench set, and a screwdriver to complete this repair. Customers rate this repair as Easy.

Pulley/Spring Assembly – Part Number: 498144

Your Price

$20.78

Dethatcher Pulley/Spring Assembly

★★★★★

2 Reviews

PartSelect Number PS8988822

Manufacturer Part Number 498144

Your Price

$3.99

Dethatcher Nut-Lock, Ni

PartSelect Number PS9276436

Manufacturer Part Number 3296-29

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

Your Price

$58.83

Dethatcher Magneto

PartSelect Number PS9278124

Manufacturer Part Number 397358

Your Price

$3.99

Dethatcher Ring-Retaining

PartSelect Number PS8950132

Manufacturer Part Number 32151-61

This metal retaining ring, otherwise known as a snap ring, holds parts in place in your lawn equipment, such as blades, shafts, pulleys, or other rotating components, to prevent them from sliding off or shifting. A broken ring may be warped, cracked, or have missing sections. You can tell if it is damaged when the components in your machine are wobbly or falling off. To remove a retaining ring, you will need a pair of needle-nose pliers or lock/snap ring pliers that fit into the grooves of the ring. By using the pliers to release the tension on the ring, you can carefully slide it off the machine. Consult your user manual for instructions on the removal process and to confirm how many rings your machine will need. This replacement part is sold individually and is produced by the original equipment manufacturer so that it precisely fits your machine.

Installation Instructions

Thomas from ALFRED, ME

5 HP Briggs and Stratton chipper shredder - no spark

Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective, Read more...