Cub Cadet Lawn Mower Starters
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Cub Cadet Lawn Mower Starters
Cub Cadet Lawn Mower Pulley/Spring Assembly
PartSelect Number PS8988822
Manufacturer Part Number 498144
Cub Cadet Lawn Mower Gear-Pinion (Plastic and Aluminum Ring Gear)
PartSelect Number PS9066374
Manufacturer Part Number 695708
Cub Cadet Lawn Mower Starter-Rewind
PartSelect Number PS8981884
Manufacturer Part Number 497680
This recoil starter is for lawn and garden equipment engines.
Recoil starter spins the crankshaft to start the engine when you pull the rope.
Installation Instructions
Seikai from MARICOPA, CA
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel, pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
Read more...
Cub Cadet Lawn Mower Plate-Pawl Friction
PartSelect Number PS9066349
Manufacturer Part Number 695128
Cub Cadet Lawn Mower Motor Starter
PartSelect Number PS11829347
Manufacturer Part Number 593934
This authentic manufacturer sourced replacement part is designed for use with lawn and garden engines. The starter motor provides an initial motion, engage the flywheel to start the engine. This starter motor features a 14 tooth metal gear. To complete this repair you would need a wrench.
Cub Cadet Lawn Mower Solenoid-Starter
PartSelect Number PS9064363
Manufacturer Part Number 691656
A starter solenoid, also known as a starter relay, is an electrical component that is used within small engine systems to control the starter motor by engaging it when an ignition key is turned - acting as a bridge between the battery and starter motor. This starter solenoid is designed for use with various models of lawn mower and other small engine equipment and is sold as an individual part with no securing hardware. Depending on your model and type of equipment, the location of the starter solenoid may be different, but it is typically located on or around the engine block, and close to the battery. If you notice issues with starting your equipment such as clicking sounds, intermittent starting or simply not starting at all, the solenoid may be burnt or damaged and need replacement immediately. You can test the solenoid for continuity on its terminals with a multimeter, but make sure to take safety precautions. To replace a starter solenoid, you need only disconnect the equipment from power, locate the solenoid, disconnect and remove any connections and securing bolts before you can replace it and test for full functionality.
Installation Instructions
Bruce from CARNATION, WA
Wouldn’t start.
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
Read more...
Related Cub Cadet Lawn Mower Parts
- Cub Cadet Lawn Mower Bearings
- Cub Cadet Lawn Mower Brackets and Flanges
- Cub Cadet Lawn Mower Caps and Lids
- Cub Cadet Lawn Mower Carburetors
- Cub Cadet Lawn Mower Dipsticks
- Cub Cadet Lawn Mower Engines
- Cub Cadet Lawn Mower Filters
- Cub Cadet Lawn Mower Hardware
- Cub Cadet Lawn Mower Hoses and Tubes
- Cub Cadet Lawn Mower Seals and Gaskets
- Cub Cadet Lawn Mower Springs and Shock Absorbers