Crosley Washer Legs and Feet

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Crosley Appliance Parts
Shop By Part Type

Popular Crosley Washer Legs and Feet

Videos!
Your Price
$7.45
  In Stock
Crosley Washer Foot, Front - Single
★★★★★
★★★★★
4 Reviews
PartSelect Number PS11747965
Manufacturer Part Number WPW10001130
The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is important that when installing this part you are very careful, if not installed correctly your washer will be off balance which will then cause it to vibrate and/or shake during the cycle. The function of the adjustable foot is to keep your washing machine supported and to make sure that it is level at all times. The tools you will need for this repair include a pair of channel lock pliers, and a 9/16 wrench.
Installation Instructions
Paddy from Ferndale, WA
Bearings went out in the drum.
purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in.. Read more...
Videos!
Your Price
$25.94
  In Stock
Crosley Washer Screw-In Plastic Leveling Leg
★★★★★
★★★★★
4 Reviews
PartSelect Number PS1152204
Manufacturer Part Number 134548800
This is a screw in leveling leg for your washing machine. It supports the appliance by screwing in place to create a stable and flat surface. Take note that you are able to adjust the height of your appliance to make it leveled. This model is made entirely of plastic and is white in color. It is just under 2.5 inches long, 1.5 inches wide, and the head has a diameter of roughly 1.5 inches.
Installation Instructions
Sandra from Denton, TX
Stopped agitating versus level washer feet/leg
My washing machine stopped agitating and spinning and I couldn't afford a repair man...plus I wanted to exhaust any obvious problems first. One of the leveler feet had broken years ago. Since I luckily had determined via reading other posts that the agitator won't work if the cycle safety switch is not functioning right, I thought the safety switch might need to be changed but after careful thought, I decided to order a new levelling leg first because maybe the broken levelling leg was shaking the safety switch so it wasn't connecting right. Once I received the leg overnight, I flipped the washer on its side and had to drill out the old leg. It was a little tricky because of how it broke, but the drill worked. I flipped the washer back up, leveled it with the new foot, and the agitator was miraculously working again...just like new. I didn't need the safety switch. Thanks to partselect.com for having the details of my washer parts to study up on and get me the right part so quickly. I saved myself alot of money. Read more...
Videos!
Your Price
$15.28
  In Stock
Crosley Washer Rubber Foot Pad
★★★★★
★★★★★
1 Review
PartSelect Number PS11738859
Manufacturer Part Number WP210684
The leveling leg pad or foot pad fits over the leveling leg on your washing machine. The foot pad is designed to protect your floor and keep the washing machine level and in place. This foot pad is just over an inch in diameter. It is made entirely of rubber and is gray in color. This pad is intended for use with washers and some dryers. Many of our customers have rated this repair as very easy. To complete the repair, turn the old leg counter clockwise to remove it. Then, simply remove the old pad and replace it with the new one. Finally, re-attach the leg by turning clockwise. Ensure that the washer is level, and adjust the leg accordingly if it is not.
Installation Instructions
Paddy from Ferndale, WA
Bearings went out in the drum.
purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in.. Read more...
Videos!
Your Price
$20.75
  In Stock
Crosley Washer Rear Leveling Foot
★★★★★
★★★★★
1 Review
PartSelect Number PS334463
Manufacturer Part Number 285244
Sold Individually. Used to help stabilize the appliance on uneven surfaces.
Your Price
$24.78
  In Stock
Crosley Washer Leveling Leg
★★★★★
★★★★★
1 Review
PartSelect Number PS2349253
Manufacturer Part Number 134639100
Sold individually.
Videos!
Your Price
$18.47
  In Stock
Crosley Washer Adjustable Leveling Leg
★★★★★
★★★★★
1 Review
PartSelect Number PS2021026
Manufacturer Part Number 22003428
If your washer shakes or vibrates loudly when it reaches its max speed, make sure the 4 levelling legs are even. Adjust the legs so that the machine is level, and tighten the locking nuts on the legs that are threaded. Your washer should be kept as close to the floor as possible. Your model might have rear legs that level themselves, or it might have threaded legs all around. Make sure the rubber feet have not worn out. Replace any missing or damaged legs and feet. This genuine OEM replacement part is sold individually, so be sure to order the amount you need.
Installation Instructions
Rebecca from Wylie, TX
Stripped leveler screw making impossible to level my washer
Put blocks under the washer where the leveling leg was needed and screwed the part into the washer. Then it was just a matter of moving the washer into place and leveling. Pretty easy. Read more...
Videos!
Your Price
$8.36
  In Stock
Crosley Washer Leveling Leg
PartSelect Number PS10062745
Manufacturer Part Number W10739673
Sold individually.
Installation Instructions
Oralia from DALLAS, TX
washer shaking
the repair went well but I still haven't received a refund for the order was was sent incorrectly. Order #22085769 order date 2/3/23 Read more...
Your Price
$13.44
  Special Order
Crosley Washer Levelling Leg Pad
PartSelect Number PS417749
Manufacturer Part Number 131422100
Sold Individually.
Installation Instructions
Sandra from Denton, TX
Stopped agitating versus level washer feet/leg
My washing machine stopped agitating and spinning and I couldn't afford a repair man...plus I wanted to exhaust any obvious problems first. One of the leveler feet had broken years ago. Since I luckily had determined via reading other posts that the agitator won't work if the cycle safety switch is not functioning right, I thought the safety switch might need to be changed but after careful thought, I decided to order a new levelling leg first because maybe the broken levelling leg was shaking the safety switch so it wasn't connecting right. Once I received the leg overnight, I flipped the washer on its side and had to drill out the old leg. It was a little tricky because of how it broke, but the drill worked. I flipped the washer back up, leveled it with the new foot, and the agitator was miraculously working again...just like new. I didn't need the safety switch. Thanks to partselect.com for having the details of my washer parts to study up on and get me the right part so quickly. I saved myself alot of money. Read more...
Your Price
$34.39
  In Stock
Crosley Washer Leveling Leg
PartSelect Number PS418835
Manufacturer Part Number 131841600
Sold individually.
Your Price
$17.96
  In Stock
Crosley Washer Single Motor Grommet
★★★★★
★★★★★
1 Review
PartSelect Number PS11743304
Manufacturer Part Number WP62691
Sold Individually.
Fixes these symptoms
Installation Instructions
Robert from Friendswood, TX
Spider coupling between motor and transmission broken
Followed the video on the website. I removed the hoses from the pump rather than removing the pump as suggested in the video. Then separated the motor from the transmission and replaced the coupling; then reattached the motor and hoses. Lining up the washer cover and clamping it back on was the most trouble. But all in all, a easy repair. Read more...

Related Crosley Washer Parts

Back to Top