Cooktop Legs and Feet

Your Price

$12.51

Cooktop Grate Foot

★★★★★

18 Reviews

PartSelect Number PS2353327

Manufacturer Part Number WB02T10461

The Grate Foot is a black rubber part which attaches underneath the grate in order to protect your stovetop from being scratched, which it does by cushioning the grate on your gas range. If this part appears visibly broken or no longer holds in place, which can happen to these feet over time, then it should be replaced. Check your model number and user manual to see if this part is right for you. Because this part is sold individually, make sure to order the quantity that you require. We generally recommend checking all of the grate feet on your appliance and replacing them at the same time, since it is an inexpensive part and they tend to wear out at around the same rate. Spares are good to have in the event of future failures. Before beginning this repair, ensure that the surface is cool to the touch. Simply pull the worn or cracked foot out and install the new grate foot. This process should not require any tools or accessories.

Fixes these symptoms

Touchpad does not respond
See more...

Installation Instructions

FRANK from MEMPHIS, TN

The cooktop had a shorted out burner control.

Unpllug the cooktop and turn off the gas supply. Remove the grates and burners.(they just lift out). Using a torx screwdriver, remove all the torx screws below where the burners sit. There are three screws per burner, except the power burner which has only two screws. Genly lift the stainless steel cooktop, separating it from the rest of the enclosure. Hold the electrodes with one hand, while gently twisting and pulling the wire connector off. Now, remove the aluminum covered foam piece. You will now have acess to the wiring harness assembly. Disconnect the quick connectors and replace with the new assembly. Re-assemble in the reverse order and you're done. About 1.5 to 2 hours. Good Luck Read more...

Your Price

$13.13

Cooktop Burner Grate Foot

★★★★★

13 Reviews

PartSelect Number PS11729077

Manufacturer Part Number WB02X24790

This burner grate foot, also known as a bumper, is an authentic OEM replacement part for your range. It is a small black rubber component that acts as a buffer between the metal grate and the surface of the cooktops to prevent scratches and damage to the cooktop. It also stabilizes the burner grate and prevents it from shifting or sliding, which reduces the risk of accidents or spills. These small components can easily fall and become lost while cleaning or wear down over time. Inspect each of the feet and ensure that you order the correct amount for your range. Each burner grate foot is sold separately.

Installation Instructions

Irene H from HENRICO, VA

Missing grate foot / bumper

Put in a new foot / bumper. That's it. Read more...

Your Price

$8.38

Cooktop Burner Grate Pads - Kit of 5

★★★★★

7 Reviews

PartSelect Number PS389174

Manufacturer Part Number 814323

These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.

Installation Instructions

Eric from Durango, CO

Too much heat caused the turntable to shatter and the table support ring to melt.

Washed the turntable and placed it in the microwave. Read more...

Your Price

$8.48

Cooktop Grate Pads - Set of 4

★★★★★

6 Reviews

PartSelect Number PS988447

Manufacturer Part Number 8186321

Also known as grate feet.

Videos!

Your Price

$14.00

Cooktop LEG LEVELER

★★★★★

4 Reviews

PartSelect Number PS2339673

Manufacturer Part Number WB02K10182

Your Price

$9.84

Cooktop Burner Grate Pads - Set of 4

★★★★★

5 Reviews

PartSelect Number PS389247

Manufacturer Part Number 814465

These burner grate pads are for your range or cooktop, and act as a buffer between the actual cooktop and the burner grates. If you notice your current burner grate pads are damaged, missing, or misshapen, you should replace them. These parts are sold in a package of 4 grate pads, black in color and are OEM parts sourced directly from the manufacturer.

Installation Instructions

Vivian from Irvine, CA

worn out grate pads

simply removed the old worn out pad and replaced it with the new ones. Read more...

Your Price

$7.88

Cooktop Grate Feet - Kit of 4

★★★★★

2 Reviews

PartSelect Number PS2330208

Manufacturer Part Number W10185266

This kit contains 4 grate feet for a range. These are the feet to fit your burner grates so the burner will not scratch your cooktop. The are black in color and made of rubber. These feet are fitted with a specific fire-resistant adhesive. If necessary, be sure to order adhesive separately. Be sure your burners are off and have cooled down to the touch before replacing these parts.

Installation Instructions

RICHARD from BROKEN ARROW, OK

replace pads or feet on steel grate of gas stove

pull old ones out of legs. need to glue new ones in, they fit too loose. Some kits contain glue. get some high temp head gasket cement. a drop on each one is plenty. I used some old porcelain glue and hope it will hold. the pads are 2 bucks each plus shipping so don't let them get away!!! Read more...

Your Price

$31.04

Cooktop SPACER

PartSelect Number PS8709371

Manufacturer Part Number 00413552

This spacer kit, also known as a grate foot kit, is a set of four padded feet designed to protect your burner grates and prevent scratches on the cooktop. Typically located at the bottom corners of the grates, these feet create a protective layer between the grates and the cooktop surface. You can tell if a grate foot is worn out by checking for signs of damage. Look for any missing pieces or significant flattening of each foot. Your grates may also wobble or not sit level on the cooktop. If the grate feet are not replaced when they are worn out, cooking can become difficult. Unsteady grates may lead to spills, while direct contact with the cooktop can cause scratches, damage, or discoloration. To replace the grate feet, start by unplugging the appliance and shutting it off at the circuit breaker. You will need a putty knife and high-temperature adhesive. Lift the burner grate and turn it over. Use the putty knife to pry out the worn-out foot and clean its slot as thoroughly as possible. Attach the new foot into the slot using adhesive. Remember that each genuine OEM kit contains four feet, so make sure to confirm the required quantity for your cooktop before purchasing.