Genuine OEM Auger Parts – PartSelect.com

Your Price

$4.99

Auger TERMINAL, XRU11

PartSelect Number PS16390378

Manufacturer Part Number 644809-6

Your Price

$4.99

Auger Primer Pump

PartSelect Number PS8858167

Manufacturer Part Number 12318140630

The Primer Pump, aka the Pump Bulb, is a clear, individually sold, plastic part, sourced from the original equipment manufacturer. It has an Outer Diameter of 0.616 Inches, 15.66mm and is 0.558 Inches and 14.19mm in height. This part is used to pump fuel from the tank to the carburator and is rated Easy to install. This part installs onto the primer assembly. If the part dries out or starts leaking that means it is broken (likely due to fatigue or general wear) and must be replaced. Check the model number to ensure you are choosing the right part.

Your Price

$8.60

Auger Filter, Fuel

★★★★★

2 Reviews

PartSelect Number PS11826309

Manufacturer Part Number A369000460

The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy. The part attaches inside of the fuel tank and is used to clean the fuel of debris. It should be changed regularly. Check your owners manual for the recommended replacement schedule for your engine. If the fuel is leaking or their is a blockage, you will know the part is broken and will likely need to be replaced. To check for small leaks, feel around for dampness and the smell of fuel.

Installation Instructions

Keith from NORWOOD, NJ

Replace clogged fuel filter.

Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done. Read more...

Auger Return Grommet

PartSelect Number PS9995391

Manufacturer Part Number 6697846

This individually sold grommet is a genuine OEM part and is used for a variety of different small engine/outdoor lawn equipment. The return fuel line from the carburetor is installed through this grommet, which creates a seal to prevent future leaks and ignition issues. Over time and through exposure to fuel, the grommet can wear down, leading to cracks, tears, and missing pieces. If you notice fuel is leaking during operation, or are having issues with starting the engine, this grommet may be the cause. Depending on your model, installing the return line in the grommet and then installing both together in the fuel tank may be easiest, rather than installing them separately.

Pipe Fuel Assembly – Part Number: 6688169

Your Price

$5.19

Auger Pipe Fuel Assembly

PartSelect Number PS9991788

Manufacturer Part Number 6688169

The fuel pipe/fuel line assembly is a genuine OEM parts kit used in gas-powered outdoor equipment with dimensions of 5mm x 160mm. It includes a pipe or line, which carries fuel from the tank to the carburetor, and a rubber grommet which holds the fuel line in place. The grommet also has a flange that prevents it from being pulled into the body of your equipment. Over time the grommet may wear down and the fuel line can become brittle and crack causing fuel leakages and difficulty starting or running your equipment. Therefore, it is important to routinely inspect this assembly and replace it when it shows signs of wear. Before your repair, drain the fuel for your safety and to prevent contaminating the fuel tank. To install a new fuel pipe assembly, simply pull off the old grommet and detach the fuel line. Carefully insert your new fuel line into the new grommet and connect the line to the carburetor and the fuel filter inside the fuel tank on your equipment.

Your Price

$6.81

Auger Purge Bulb

★★★★★

2 Reviews

PartSelect Number PS8857246

Manufacturer Part Number 12318139130

This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sold individually. This part will be found in various locations, depending on your model; refer to your owners manual to locate it on your machine, but is commonly found on the side of the air cleaner or carburetor. To complete this repair, you will need a screwdriver. The Purge Bulb needs to be replaced when it is cracked or damaged. It will become fatigued through regular use and may leak fuel when it is malfunctioning. Customers rated this repair as Easy.

Installation Instructions

Richard from SPRING HILL, FL

Bulb was worn out and broken open

The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place. Read more...

Fuel Tank Vent – Part Number: A356000031

Your Price

$7.63

Auger Fuel Tank Vent

★★★★★

1 Review

PartSelect Number PS9183121

Manufacturer Part Number A356000031

This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Make sure the engine is cool before you begin this repair, and remove the wire and boot from the spark plug to prevent the engine from starting up.

Installation Instructions

Donald from ORANGE PARK, FL

fuel tank leaking around where lines went in tank

took all the old parts off and replaced them Read more...

Your Price

$27.43

Auger Kit, Fuel Line

★★★★★

1 Review

PartSelect Number PS10041190

Manufacturer Part Number A201153

Your Price

$3.99

Auger Nut-Lock, Ni

PartSelect Number PS9276436

Manufacturer Part Number 3296-29

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.