Ariens Lawn Tractor Bearings

Ariens Lawn Tractor Bearing

Ariens Lawn Tractor Bushing This OEM-sourced flange bushing supports smooth movement in your lawn equipment by reducing friction. This bearing has an inner diameter of 0.625 inches, an outer diameter of 0.750 inches, a width of 0.5 inches, and a flange diameter of 0.875 inches. Depending on the model and make of your machine, this bushing can be found in various parts of your machine, such as pivot points, axles, and spindles. A damaged bushing causes increased friction, misalignment, and grinding or squeaking noises. Your machine may need expensive repairs and may eventually fail if you do not replace a broken bushing. To remove an existing bushing, you need to remove components that provide access to the flange bearing. Consult your user manual if needed. Locate the bearing and use a screwdriver or wrench to remove any clips, screws, or bolts securing it. Use a bearing puller tool or a mallet to pull or tap the bearing out of your machine if necessary. Please note that the bushing is sold individually.

Ariens Lawn Tractor Bearing-Ball-Mandrel

★★★★★

★★★★★

1 Review

Ariens Lawn Tractor Flange Bushing - 1.00 x 1.25 x 1.50 x 1.50

★★★★★

★★★★★

2 Reviews

This part is the replacement flange bushing for your outdoor power equipment. It is made of black plastic and will need to be replaced if it breaks. The flange bushing attaches to the caster fork weldment. This flange is sold individually, but you may need to replace more than one at a time. This is a genuine OEM part sourced directly from the manufacturer.

Ariens Lawn Tractor Bushing

Ariens Lawn Tractor Flange Bushing

Ariens Lawn Tractor Bearing, Ball This silver metal Ball Bearing is used to reduce the friction between rotating parts and allowing for even weight distribution. This part will require a screwdriver, pliers, socket set, wrench set and nut driver. Its installation is rated as "Easy". An installation tip: ball bearings should be tapped into place. If broken or worn down, you will hear a grinding, growling, screeching, or rumbling sound, and the part should be replaced. Bearings should spin freely with no noise. If the spin is rough, makes a noise, or the balls are discolored, this means they are too worn and should also be replaced. This part requires a bearing puller. Refer to your make, model and diagram to check if this is the right part.

Ariens Lawn Tractor Flange Bushing

Ariens Lawn Tractor Flange Bushing

Ariens Lawn Tractor Bearing.Col.Strg.Blk.