Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
Amana Cooktop Valves
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Amana Cooktop Valves
Amana Cooktop HEAD, BURNER (RIGHT REAR, LEFT FRONT)
PartSelect Number PS11745753
Manufacturer Part Number WP8286814
Amana Cooktop HEAD, BURNER (LEFT FRONT & RIGHT FRONT)
PartSelect Number PS11745754
Manufacturer Part Number WP8286815
Amana Cooktop HEAD, BURNER (LEFT REAR)
PartSelect Number PS11745752
Manufacturer Part Number WP8286813
Amana Cooktop REGULATOR
PartSelect Number PS12070643
Manufacturer Part Number W11087445
Installation Instructions
Josh from Yucaipa, CA
Bad regulator
We were building a house and had a very tight budget. We wanted our cabinets and granite to fit high end appliances so we wouldn't have to do a complete remodel to upgrade appliances. We got our appliances used but it good shape. We cleaned them up and replaced anything that looked worn. I saw our same appliances at the hardware store. The oven was $1800 and the range was $800. We paid $500 for both and around $100 in parts. The appliances work perfect and look brand new. No one knows they were used appliances and we got to spend the savings on the nicer granite!
Read more...
Amana Cooktop Burner Head - 12K
PartSelect Number PS11754345
Manufacturer Part Number WPW10406797
This part distributes flame evenly to your cookware.
Installation Instructions
Charles from ATLANTA, GA
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read more...
Amana Cooktop Burner Cap
PartSelect Number PS11745641
Manufacturer Part Number WP8284669
Burner Cap - 6000 BTU
Sold individually.
Amana Cooktop Burner Head - 6K
PartSelect Number PS11754341
Manufacturer Part Number WPW10406243
This is the Right Rear Burner Head.
Installation Instructions
Charles from ATLANTA, GA
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read more...
Amana Cooktop Burner Head Cap with Spark Electrode
PartSelect Number PS11741734
Manufacturer Part Number WP3412D025-09
This is a burner head cap with spark electrode for your range, and it distributes flame evenly to your cookware. It does this by steering the gas to the back and front burner heads, which will divide the gas equally across the cookware. The most common reason for needing to replace it is if the element will not heat, the gas ignitor will not light, and/or you can smell gas. This model is black, has a diameter of exactly 4 inches, and is roughly 3 inches high.
Installation Instructions
paul from mc neal, AZ
porcelan on igniter broken (2)
remove 2 screws that hold element in place, remove element, replace with new element, and replace screws , replaced burner assy on other
Read more...