Air Conditioner Circuit Boards and Touch Pads

Your Price

$221.34

Air Conditioner Electronic Control Board

★★★★★

1 Review

PartSelect Number PS12337401

Manufacturer Part Number WP26X22240

Your Price

$31.19

Air Conditioner Escutcheon

PartSelect Number PS3522291

Manufacturer Part Number 3831A20145E

This is an escutcheon, otherwise known as a control panel overlay, for your air conditioner. This replacement part covers control panel and labels the selection button on the appliance user interface. It is 8.6 inches wide and 4.5 inches tall. Be sure to unplug your appliance before completing this repair.

Your Price

$128.98

Air Conditioner PC BOARD

★★★★★

1 Review

PartSelect Number PS9864875

Manufacturer Part Number 5304496261

Control boards, also known as display boards or user interface boards, are used within electronics such as appliances to control and manage most, if not all the processes within the appliance. This control board is designed for use within various models of window unit air conditioners to display the temperature of the air that the appliance is emitting and is sold as an individual part. This control board measures approximately 7.3-inches long and features a 24-pin connector to attach within the appliance. If your air conditioner has certain error codes, does not turn on or off, or if you simply notice unusual behavior, the control board may be the reason behind it. You can test your control board for continuity with a multimeter or check for any signs of burns to see if it has shorted and is not delivering power properly. The control board is normally secured within the user interface/display panel on the front of the air conditioner and will likely only require a screwdriver or wrench to access. To replace an air conditioner control board, ensure its power is disconnected and use your user manual to locate it, before you disassemble any necessary portions of the appliance. Take pictures of any wiring harnesses for future reference, and replacing the old control board is as simple as disconnecting it and installing the new one.

Installation Instructions

William from Selma, TX

A/C blows cold for 10 seconds then heating element comes on and blows hot

I bought both PC BOARDS and the 3 thermostats even tho I read that cleaning the thermostats will sometimes work. Installed thermostats but still blew hot. Installed push button control module because wife said the buttons don't always work, still blows hot.
Slide out A/C from frame about 8 inches, remove 4 screws that hold top cover. All the wires and thermostat connectors must be removed to get main control module out. I took lots of pictures and made my own wiring diagram with notes. The wire connectors look like regular push type, but they do have a release tab that can be pushed with needle nose plyers. Remove screws holding module, and do everything in reverse. Yes, the A/C works properly now. I spent an extra $110 for the thermostats and push button control, but am very happy it works and didn't have to buy a new A/C. Read more...

Your Price

$117.45

Air Conditioner Electronic Control Board Assembly

★★★★★

1 Review

PartSelect Number PS2359312

Manufacturer Part Number 5304471197

This electronic control board assembly is for room air conditioners. Electronic control board assembly manages the operations of the room air conditioner like temperature and fan speed. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included. Unplug the room air conditioner before installing this part. Wear work gloves to protect your hands.

Installation Instructions

Mary Grace from WOODSIDE, NY

Power doesn't turn off. Compressor continues to run when control switch is off.

1. Most importantly, unplug the a/c unit from the electric wall socket for safety.
2. Remove the filter at the front of the unit.
3. Remove the 2 screws located behind the filter.
4. Open the front cover of the unit using flat screw driver.
5. Unscrew the attached Old electronic control board from the front cover of a/c to detach.
6. Unplug the Old electronic control board from the a/c unit.
7. Plug in the New electronic control board to the a/c unit.
8. Plug the a/c to the electric wall socket to test is the new electronic control board works before closing up everything. Read more...

Your Price

$143.44

Air Conditioner User Interface PCB/Display Board

PartSelect Number PS2582890

Manufacturer Part Number 5304477181

Your Price

$114.20

Air Conditioner PC BOARD

PartSelect Number PS2379614

Manufacturer Part Number 5304476177

Your Price

$158.62

Air Conditioner Electronic Control Board

PartSelect Number PS8757489

Manufacturer Part Number WJ29X10053

The electronic control board manages the operations of the room air conditioner like temperature and fan speed.

Your Price

$212.67

Air Conditioner Main Switch

★★★★★

1 Review

PartSelect Number PS282095

Manufacturer Part Number WP28X56

Installation Instructions

JEANIE from LAQUEY, MO

Appliance would not shut off- heated or cooled just fine but never turned off.

Turn off the circuit breaker. 1- Removed cover- (clips on both sides of bottom front pop loose and carefully lift off) 2. Remove knobs. Unscrew the lock washer on the switch pegs 3. Unscrew all visible screws approx 4 in front and 2 on the side 4. This will allow you to jar the aluminum box loose from the top- it does not come off completely. 5. Carefully locate the switch-circuit board behind the left knob. 6. Unplug both lines- insert new part (main switch) connect both lines into the new part. 7. Replace the box just as you took it apart. 8. Make sure the knob pegs are turned all the way to the left. Reinstall lock washer. Then align knobs on appropriate pegs.turn on the circuit breaker. Check that knobs are aligned properly and turn on - let it run so that it would shut off as you raise or lower the heat or cool. If it shuts off- yeah it is fixed!!! Replace the cover carefully after a thorough cleaning. You are DONE! Read more...