Westinghouse Washer Knobs

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Westinghouse Appliance Parts
Shop By Part Type

Popular Westinghouse Washer Knobs

Videos!
Your Price
$43.86
  In Stock
Westinghouse Washer Control Knob
★★★★★
★★★★★
5 Reviews
PartSelect Number PS418888
Manufacturer Part Number 131858004
Sold individually. This white knob accepts a D-shaped shaft.
Fixes these symptoms
Installation Instructions
Zackary from Fort Collins, CO
knob broke
pulled old knob off. pushed new knob on. Read more...
Videos!
Your Price
$57.94
  In Stock
Westinghouse Washer Selector Knob
★★★★★
★★★★★
44 Reviews
PartSelect Number PS2330885
Manufacturer Part Number 134844410
This selector knob, also be known as the laundry appliance control knob, is meant for your washer or dryer. This model is sold individually and takes a D-shaped shaft. The purpose of this part is to attach to the shaft of a rotary or starter switch, which is located on the control panel. To install this part, remove your old selector by grabbing it with a firm grip and pulling it straight off. If the metal insert came off with the old part, pull it off as well, making sure the new knob will have enough room to snap in its place. No tools are required to make this repair.
Fixes these symptoms
Installation Instructions
charles from new holland, OH
Dryer squealed like a pig and at times the drum stopped rotating
First thought the problem was a stretched drum belt or bad idler pulley. Ordered a new belt and idler assy plus spring. Replaced those items with relative ease following suggestions obtained at this site.However, problem persisted and I now suspected a bad drum bearing. Odered the bearing kit and replaced same using the following procedure.
1. Removed the cover from the back of the dryer (held in place via two phillip head screws)
2. Pushed down on the idler assy and removed the idler spring to release the drum belt.
3. Inserted flat tip screwdriver between the top panel and the dryer main body in the front of the dryer to pry the top loose from the two retaining clips.
4. used phillips screwdriver to remove the two retaining screws (one left, one right) that hold the front panel to the main body of the dryer. (about a foot down from the top of the dryer).
5. disconnected the wiring plug on the top right hand side at the top of the dryer.
6. lifted the front panel slightly removing it from the main body and placed it to the side.
7. lifted the rear of the drum to release it from the bearing bracket and removed the drum belt.
8. Pulled the drum through the front of the dryer body and moved it to an open work area.
9. Reached into the Dryer and loosened the two
bearing bracket screws with a nut driver. Here's where another pair of hands would have come in handy. Holding the ground bar on the back of the drum with on hand, reached into the dryer and finished removing the bracket screws somehow managing not to drop the tiny grounding ball (size of a BB) Removed the badly damaged plastic bracket, grounding bar, and grounding ball and set
them aside to be discarded later.
10. Used impact driver with phillips attachment to remove two of the three screws that hold the bearing to the back of the drum (these are on the inside) The third screw's head stripped out and I had a very difficult time removing it. Had it not been for that, the job would have taken less than an hour.
11. I had my wife hold the bearing in place while I started the three retaining screws.
12. My wife also got behing the dryer and held the grounding bar in place while I installed the new bearing bracket . (this kept me from loosing the grounding ball)
I just reversed the rest of the procedures to install the drum belt, drum, front panel, etc.
The dryer works like new now, doesn't squeal.
Also replaced the on/off switch knob (just pulled the old one from the stem and slid the new one on. Read more...
Your Price
$42.57
  In Stock
Westinghouse Washer Control Rotary Knob
★★★★★
★★★★★
1 Review
PartSelect Number PS418709
Manufacturer Part Number 131761704
Sold Individually. This knob accepts a D-shaped shaft.
Installation Instructions
Sally from Acton, AL
Broken Spin Speed Knob
Very simple! Found the part using the diagrams and photographs on this site. When it came, my husband ust pulled the remainder of the broken knob off the little post with a pair of needle-nosed pliers. Slid the new knob on. It took longer to find the pliers than to make the repair! Read more...
Your Price
$87.82
  In Stock
Westinghouse Washer Timer Knob
PartSelect Number PS815514
Manufacturer Part Number 134191800
This is a genuine timer knob, which works with washers.
Installation Instructions
SEENA TERENA from ROSEDALE, IN
I bought the washer used. The person got rid of it cheap because the kobs were broken. The repair was cheap and easy to do. It was worth it.
One knob just screwed right on. The others just snaped in place. That easy! Read more...
Your Price
$55.82
  Special Order
Westinghouse Washer Knob
PartSelect Number PS418747
Manufacturer Part Number 131786603
Your Price
$45.94
  Special Order
Westinghouse Washer KNOB
PartSelect Number PS418232
Manufacturer Part Number 131592001
This is a knob but you may also know it as a control knob and it is a part for your washing machine. It allows the user to change and adjust the different timer settings on your appliance. This knob is all white, it has a protruding middle for an easy grip, it is made entirely of plastic, and has a diameter of 2 inches.
Your Price
$29.47
  Special Order
Westinghouse Washer KNOB
PartSelect Number PS418235
Manufacturer Part Number 131592004
Your Price
$38.85
  Special Order
Westinghouse Washer Rotary Knob
PartSelect Number PS418746
Manufacturer Part Number 131786602
Sold Individually. This knob accepts a D-shaped shaft.
Your Price
$71.06
  Special Order
Westinghouse Washer KNOB
PartSelect Number PS416963
Manufacturer Part Number 131140601
  No Longer Available
Westinghouse Washer Rotary Knob
★★★★★
★★★★★
4 Reviews
PartSelect Number PS2330887
Manufacturer Part Number 134844412
This knob will accept a D-shaped shaft. Sold individually.
Installation Instructions
sandra from st. louis, MO
The knob broke that started my dryer. I was totally impressed with the promptness of receiving the part I ordered. I ordered it online on a Friday, and it arrived the very next day. Thanks a million!!
All I needed to do was press the knob in place. Read more...

Related Westinghouse Washer Parts

Back to Top