Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
January 26, 2018
I am looking for replacement filters for the hot and cold water inlets mounted in the valve t they say yo can remove and clean.I see you can get them with the valve assemble but thought you may be able to buy them by them self
For model number wt4801cw
Hello Craig, Thank you for your inquiry. We show that those are only available as part of the water inlet valve. Hope this helps!
Was this helpful?
Thank you for voting!
Robert
February 22, 2020
Unit went dead during wash cycle and now receives no electrical power when plugged in. Other than the noise filter or the main pcb, could there be any other contributing factors to this failure? Machine is not very old.
For model number wt4801cw
Hello Robert,
Thank you for your question. If you're experiencing almost complete electrical failure of your appliance, we would recommend taking a look at the wiring harness, which there are two of in this model. They are available under part numbers PS3643006 and PS3636690. The wiring harness acts as the conduit that connects all of the electrical components together in the appliance, like a pathway that carries the electrical currents where they need to go. If there is a break in the harness, it would be the most likely cause of your symptoms. We hope this helps you.