This door strike is an authentic OEM replacement part that is compatible with various models of top-load washing machines. The door strike is located along the door frame, where it engages with the la...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This is an inlet valve for your washing machine. The inlet valve is an electrically controlled valve with a solenoid that opens and closes as needed, during the water filling cycle of the washing mach...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This lid lock assembly is specially designed for top load washing machines. It is a genuine OEM part that is guaranteed to fit like the original. It includes the lid lock switch and the wiring harness...
This is an impact absorber, also known as a sound dampening pad, for washing machines. This sound dampening pad attaches to the top of your washing machine drum to reduce the severity and harshness of...
This clamp helps to prevent leaking by holding the end of water hose in place.
$10.85
In Stock
Questions And Answers for MVW7232HC0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
June 3, 2022
Display reads "add garment" then sensing, does nothing after that and says complete?
For model number MVW7232HC0
Hello Mike, Thank you for the question. During the wash cycle, this will display to let you know the cycle is in progress. Add Garment - When “Add Garment” is lit, you may pause the washer, open the door, and add items. Touch and hold START to start the washer again. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
BRENDA
March 10, 2023
Can I order an agitator for this washer, I purchased it without the agitator and do not like it at all.
For model number MVW7232HC0
Hello Brenda, Thank you for your inquiry. Sadly, we do not show a compatible agitator for this model and that it appears to only use the wash plate. We hope this helps.
Was this helpful?
Thank you for voting!
Ivan
February 10, 2024
sounds like bearings bad
For model number MVW7232HC0
Hi Ivan, thank you for reaching out. According to our research, the bearings for your model do not come separately. They come with the transmission assembly, part number PS16730208. You may need to replace it to fix the issue. We hope this sorts out your problem!
Machine touch pad shows no sign of power. Stopped in mid cycle and laundry lid is locked trapping laundry inside. Receptacle power is present, and I can’t find a reset button, if there is one.
For model number MVW7232HC0
Hi Wes, thank you for reaching out. The following parts need to be checked to fix the issue: the noise filter, part number PS16744969, the control board, part number PS12745529, and the drain pump, part number PS12731177. We hope this sorts out your problem!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
Super easy repair, simply turn the broken door strike counterclockwise to remove; insert the new door strike into the slots and turn clockwise to lock into place.
