This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This door strike is an authentic OEM replacement part that is compatible with various models of top-load washing machines. The door strike is located along the door frame, where it engages with the la...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This 6-pin shift actuator is an authentic OEM part supplied directly by the manufacturer for use in washing machines. The shift actuator is responsible for controlling the movement of the washer trans...
This is a water inlet valve made for washing machines. This part is used to control the flow of water into the fill hose of the washing machine, to allow the washer to fill up with water. If your wash...
This agitator assembly is an authentic OEM part that is compatible with various models of washing machines. It consists of a central shaft with a series of fins attached to it. When the washer is oper...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This lid lock assembly is specially designed for top load washing machines. It is a genuine OEM part that is guaranteed to fit like the original. It includes the lid lock switch and the wiring harness...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Laureen
January 22, 2024
My machine makes a loud squealing, screeching noise as it begins to spin at various times during any of the cycles….
For model number MVW6230HW0
Hello Laureen, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the drive belt, part number PS12578772, to solve the problem. We hope this helps.
hi,
having issues with my washer error code F7E1.
it fills up and spins but when is at wash the agitator doesnt move
the drum moves..
thanks
For model number MVW6230HW0
Hello Wyms, thank you for your question. Before everything else try resetting the machine by unplugging and replugging the power cord to the wall outlet. Restart the cycle. The F7E1 error indicates that the motor is not getting the required speed. If resetting does not help then it is either a problematic washer drive pulley, part number PS10057144, or a faulty drive motor, part number PS11770267. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Looking for help. Original problem with this washer was that drive motor would just hum when commanded on. Test start capacitor and and it failed. Had 0 micro farads. Replaced capacitor but now no matter what cycle or but is pushed the motor runs in spin cycle. I have also replaced the shifter mechanism but no change. I get a F7E1 trouble code. There is slight arc on one terminal of the old capacitor. Can you help with diagnosing this problem?
For model number MVW6230HW0
Hello Scot, thank you for the question. The F7E1 error code means the tachometer missing or wrong signal. You may have an issue within the electronic control board or it may just need to be rebooted. So unplug the unit for 5 minutes to try to reboot the electronic control board. If the issue persists, you will need to replace the electronic control board, part number PS16555299. We hope that helps!
Does this machine have a filter that needs to be cleaned or maintained?
We have a sour smell in our laundry room near the washer.
For model number MVW6230HW0
Hello Terry, thank you for asking. Based on the description that you have provided, we would recommend checking the drain filter, part number PS16660526, to fix the issue. You may need to remove the inner basket to access the drain filter. We hope this helps!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
