Parts That Fix Maytag Refrigerator MFI2269VEM7 Door won’t open or close
Door won’t open or close is a commonly reported symptom for the MFI2269VEM7 Maytag Refrigerator, and we have put together a full guide on how to fix this.
This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your MFI2269VEM7 Maytag Refrigerator that will fix Door won’t open or close.
We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Ratings submitted by customers like you who bought this part.
This is a center crisper rail for your refrigerator. This part acts as a support rail for the crisper drawer by holding the center of the crisper frame. You will need to replace this part is if your current drawer is not opening or closing properly. This crisper rail is white and it is made entirely of plastic. It is roughly 13.5 inches long, and 2.5 inches wide. This is an easy repair which requires no tools.
$50.81
In Stock
PartSelect Number PS11757048
Manufacturer Part Number WPW10671238
Replacing your Kenmore Refrigerator Refrigerator Center Crisper Drawer Slide Rail - White
Customer Repair Stories
crisper drawers were off center rail due to c.r fracture
removed old rail,lifted glass panel above and inserted new rail-voila!!done.
Ratings submitted by customers like you who bought this part.
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when you close the door. If your refrigerator door will not close properly, you may need to replace the pivot block. This part is sold individually and is an OEM part sourced directly from the manufacturer.
$11.12
In Stock
PartSelect Number PS11743531
Manufacturer Part Number WP67003405
Customer Repair Stories
Needed part to help fridge doors close.
Used a philips screwdriver.
Jan from Boca Raton, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace pivot block (broke) so frig door extension could close
Can not do repair. Ordered part 3/30 due to me on 4/1. Today is 4/15 and still no part. I even paid for quicker delivery. Thanks FedEx!!
Ratings submitted by customers like you who bought this part.
These parts will attach to your drawer rail and are used to help the drawer glide smoothly.
$24.64
In Stock
PartSelect Number PS2003866
Manufacturer Part Number 12002497
Replacing your Whirlpool Refrigerator Drawer Gear Kit
Customer Repair Stories
Drawer bar gear had a broken plastic piece that would not hold the bar in place
Looked at the appliance's booklet to see how it fit together, then installed it.
Shirley from Lawrenceburg, KY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Boyfriends freezer door wouldn’t shut completely
I got really tired of taking food out covered in icicles and stabbing a huge block of ice out of the bottom. Turns out all he needed was a little wheel with cogs and I looked up the sticker model number on this site and clicked the part of the fridge. So simple, wish I would’ve done it sooner.
Ratings submitted by customers like you who bought this part.
This is an OEM front cover for the pantry door of various refrigerator models. This cover is designed as a door that can cover the pantry compartment within your refrigerator and provide a transparent view of what is inside it. If this door is cracked, moldy, or missing, it needs to be replaced. This pantry door is made of durable white plastic and features a transparent window in the middle. This measures approximately 26 inches wide and 6 inches deep, and can be replaced by simply dislodging its securing tabs on the left and right side, and then inserting the new one into those same tabs. This pantry drawer cover is sold individually.
$133.13
In Stock
PartSelect Number PS11723195
Manufacturer Part Number W10827914
Customer Repair Stories
The pantry lid broke and was repaired a few times until the glue did not stick anymore
Very easy-slightly bend the end piece to fit over the peg.
Gay from HUNTINGTON, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Deli Lid Tray broke and was unable to glue back.
Ordered the part. When came in I took it out of the box and slid the two end posts into the provided holes. Lid fixed in less than 5 minutes. Part came in on the third day because I ordered on Friday afternoon.
Ratings submitted by customers like you who bought this part.
This drawer slide rail cover is for refrigerators.
Drawer slide rail cover is a decorative trim that covers the slide rail.
Wear work gloves to protect your hands when installing this part.
$35.29
In Stock
PartSelect Number PS12578233
Manufacturer Part Number W11197396
Customer Repair Stories
The deli drawer on this refrigerator rides on two plastic hinges on the end caps and opens and closes when you slide the drawer in and out. One of the hinge broke off the end cap and would not let the drawer stay in place or operate properly.
I contacted partselct to see if I could get the end caps with new hinges to correct the problem. My customer service contact was very professional and a huge help in helping me select the correct parts. When the parts arrived I was amazed they were genuine whirlpool parts, fit perfectly, and were easy to install. I have other parts to ord
... Read moreer and will use partselct again. I appreciate everything they did for me to solve this problem.
Read less
Gene from PADUCAH, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Helpful to have instructions
Since there were no instructions, I was a tad hesitant but dove in. I was just replacing the right end cap, not the left. Removed the involved shelf as well as the two drawers above. Undid the three screws involved and carefully removed the slide rail end cap as well as a part in the back that was attached. That was the hairy part. It too
... Read morek a bit of time to remove it since everything seems so brittle but I was careful and got the assembly out without breaking anything. Also had to remove the slide rail and humidity control. Nothing to removing and replacing the slide rail. You just have to put it back correctly oriented. This was easy. I just looked at the one on the left, which I hadn't removed. Most time consuming part was cleaning things that were normally inaccessible, before re-installing.
Ratings submitted by customers like you who bought this part.
This door gasket is used to make an air-tight seal for the cabinet when the door is closed.
$196.78
In Stock
PartSelect Number PS11759512
Manufacturer Part Number W10830055
Customer Repair Stories
Torn/damaged refrigerator door gaskets.
Uncurl new gaskets (set out on a table or countertop) and let them get to room temperature so they straighten out. Use hands to pull off old door gaskets. Starting at corners, use hands to push gasket into the groove on the door. Make sure gasket is properly seated all the way around the door. If some part is still wrinkled or bent, caref
... Read moreully use a hairdryer to heat it a bit and smooth it out.
Read less
Elizabeth from ALEXANDRIA, VA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old refrigerator gaskets were worn out
I unboxed the replacement gasket set and inspected them for damage. Then I opened the left refrigerator door and grabbed the right hand corner of the old gasket and removed it. I then aligned the new gasket with the door and using my fingers pushed the gasket into the gasket grove. I used my thumb to seat the gasket. I repeated the proce
... Read moress for the right door. Total time was under 15 minutes.
Ratings submitted by customers like you who bought this part.
Glass and centre support is NOT included. Must be ordered separately. This frame along with the glass provides the crisper drawer for fresh storage of vegetables
$105.12
In Stock
PartSelect Number PS11756423
Manufacturer Part Number WPW10568041
Replacing your Amana Refrigerator Refrigerator Crisper Frame
Customer Repair Stories
Crisper frame was broken
We had to take a few parts from our broken piece to attach to the crisper. It would have been easier if there were some sort of instructions to get the pieces off. We were finally able to get the metal rod off and attach to the new piece. It was rather easy,
Cathy from Safford, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
3 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Crisper frame broke
Watched the video that was attached with part invoice. Video made it easy to perform since I’ve never done this task before.
Ratings submitted by customers like you who bought this part.
This part is the replacement water filter cover for your refrigerator. The cover protects the water filter to prevent damage. If the water filter cover is cracked or missing, you should replace it. It is made of white plastic and is approximately 12 inches long, 5 inches wide at one end, and 4 inches wide at the other. To replace the water filter cover, simply depress the locking tabs and remove the old cover, then snap the new cover into place. This part is sold individually.
$72.08
In Stock
PartSelect Number PS11743682
Manufacturer Part Number WP67006331
Replacing your Whirlpool Refrigerator Water Filter Cover
Customer Repair Stories
A cover over the water filter was broken
The old cover was off and I just slid the replacement part that I got from you'll, it just slid in place and snapped close. Perfect fit. Thanks guys
Jerry from MIDLOTHIAN, VA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken latch on water filter cover.
Reviewed replacement instructions video on your website. Just followed the easy instructions to pop out old cover and pop in new cover. I would not have tried to replace it myself had I not seen your video. Super easy.
