The drum support roller (Dryer Drum Support Roller, Drum Roller and Washer Assembly) holds the drum in the proper position while it spins on the support wheels. This part rotates on the roller shaft w...
The tumbler and motor belt in your dryer allows the drum to spin during the drying cycle. At 100 inches in length, this dryer drum belt is 3/8 of an inch wide and has five ridges. The belt is black in...
The front glide is located at the front of the dryer, the drum rides along it. If you hear a metal-on-metal noise when your dryer is running, your front glide may be worn out and require replacing. Th...
This roller shaft is also known as a support roller shaft or a drum roller axle, and is a part for your dryer. The function of this piece is to act as the axle for the drum roller; it provides a place...
This comes with a metallic hub clamp to hold it firmly in place. The blower wheel with clamp is part of your dryer assembly. You will find this part attached to the drive motor shaft, which disperses ...
This kit includes both the drive belt and the pump belt which are both V-shaped. If your washer does not toss, spin, or drain water properly, this might be because one of these belts has worn or stret...
This lint filter is a genuine OEM replacement filter for your dryer. Replacing it is easy as it just slides in like your normal filter. Make sure to check the filter slot for excess buildup of lint, a...
This part is a retaining ring, sometimes called a retaining clip, that holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than an inch in diameter....
If you notice that your dryer is noisy or will not tumble, then you may need to replace the drum roller shaft washer. This drum roller shaft washer is just under an inch in diameter and is sold indivi...
This door catch kit is designed for use in dryers. This is an authentic OEM replacement part. This catch assembly ensures the door of your appliance will close, and remain closed. It allows your appli...
This part is used to help the belt to rotate the drum. It is white and made of plastic with a metallic bearing in the center.
$19.30
In Stock
Questions And Answers for LSE7804ADE
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred
December 21, 2019
How to operate the washer ?
For model number LSE7804ADE
Hello Fred and thanks for writing.
For your convenience, we have attached the link to your manual with repair instruction. We hope this helps. Good luck with your repair
https://www.manualslib.com/manual/100403/Maytag-Stacked-Laundry.html
Was this helpful?
Thank you for voting!
Fred
December 22, 2019
I do not need parts,but how do i operate the washer,(where does the soap goes, and how much? How much fabric softener and where is added.? thanks
For model number LSE7804ADE
Hello Fred and thank you for writing.
For your convenience, we have attached the link to your manual with repair instruction. We hope this helps. Good luck with your repair.
https://www.manualslib.com/manual/100403/Maytag-Stacked-Laundry.html
Was this helpful?
Thank you for voting!
Thomasine
March 26, 2020
I have 1997 Maytag stackable washer/ dryer. The washer just went out. I want to get another but i cannot find cu. Sq capacity.
For model number LSE7804ADE
Hello Thomasine, Thank you for the question. We believe this question is best addressed by the manufacturer. We are a parts distributor. We do not manufacture any units, or have access to dimensions and year of manufacture for the models. We hope this helps.
Was this helpful?
Thank you for voting!
Kenneth
December 15, 2022
When the washer goes into the spin cycle even with a smaller load there is a loud knocking noise. Can this be serious and is it possibleto repair
For model number LSE7804ADE
Hello Kenneth, thank you for reaching out. You will need to check the following parts: the drive belt, part number PS11757542, the belt kit, part number PS2005284, the tub bearing kit, part number PS2347235, the rear bearing, part number PS11739437, and the transmission drive pulley, part number PS11743025. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Does the dryer have a thermal fuse that can be replaced?
For model number LSE7804ADE
Hi David, thank you for getting in touch. The dryer of your model comes with two thermal fuses that can be replaced: part number PS11740687, and PS11740678. If you need help placing an order, customer service is open 7 days a week!
Removed the front cover (screws on bottom 0f face)...removed blower cover....spring pliers to remove and install blower fan. the rest of the time was spent cleaning the inside of the shell as well as the vent. Reassembled and dryer runs better than it has for many years.
I removed the 2 phillips screws on the bottom of the front panel. Then checked around to find the belts were actually below the floor panel. I pulled the washing machine away from the wall and tilted it bacwards and found the pump belt was off the pully and the drive belt was badly damaged. I replaced the 2 belts which took no tools
... Read moreand about 3 minutes to accomplish then resecured the front panel, pushed back in place and leveled. Complete repair from diagnosis to back in operation took less than 15 minutes.
Unplugged dryer. Front came off easily. Removed front of blower. Wheel came off fairly easily - could then see that shaft of motor was circular with flattened side but inside of old wheel was rounded. New wheel popped right on. Took tumbler off so I could clean lint out more easily and get a good view of how the belt threaded through
... Read more. Put the tumbler back on and reached back with both hands to thread it. Took a half dozen tries until I was sure it was seated correctly and not twisted. Put front... of dryer back on. So far (a week or so) the rumble is gone. Seems blower wheel was the cause of the rumble. Belt didn't seem worn but replaced anyhow.