Parts That Fix Hotpoint Dryer HTDX100EM8WW Will Not Start

Will Not Start is a commonly reported symptom for the HTDX100EM8WW Hotpoint Dryer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your HTDX100EM8WW Hotpoint Dryer that will fix Will Not Start. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 Interlock Switch

Fixes Symptom 97% of time

The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. The interlock switch senses the door is shut and the dryer can begin. This part might need to be replaced if your dryer is not starting or is in process while the door is open. The black rectangular part of the switch is approximately 2 inches long and a 1/2-inch wide with two gold plates on either end. This is a genuine OEM part that is sourced right from the manufacturer.

$ 27.50

  In Stock

1 2 3 4 5 6 7 8 9 10+ Add to cart

PartSelect Number PS1481922

Manufacturer Part Number WD21X10261

2 Push-to-Start Switch

Fixes Symptom 3% of time

This switch is used to activate the dryer.

$ 18.23

  In Stock

1 2 3 4 5 6 7 8 9 10+ Add to cart

PartSelect Number PS3487190

Manufacturer Part Number WE4M416