Order within the next 10 hrs and your part ships today!
Questions And Answers for HEI8054U
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sal
January 3, 2023
Display doesnt show anything. No time, no temp etc. It could be the Display Controller but I am not sure of the part #. thank you.
For model number HEI8054U
Hello Sal, thank you for contacting us. The issue is most probably related to the display module, part number PS12742171. It controls and displays the time, temperature, and other settings of the oven. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Hi Bo, thank you for the question. We have found that the issue is with the temperature sensor, part number PS10057828. The oven sensor works in conjunction with the oven control board to regulate the temperature. We would recommend checking the temperature sensor to fix the issue. We hope this solves your problem!
First, cut the power and remove the oven from the cabinet.
The bake element is accessible from the back and sits in a drawer.
As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.
Make a note of what w
... Read moreire goes to the right and to the left so you can plug them back like it was before.
When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.
To close the cover that you bent, you will need a helper and push really hard.
Watch the YouTube video. Turn off power or unplug the range. Remove 5 gas control knobs. Remove four T20 screws on Control panel. one on each end, L and R, two underneath, L and R. Pull off control panel and carefully flip it up onto the range, being careful not to stretch the wiring harness. Carefully remove two
... Read morewiring connectors (pinch and pull method) Remove four T20 screws securing the Control panel mount then turn it over 180 degrees. Straighten the mounting tabs until the control panel easily slides off of its mount. Remove and replace the control panel and sheet. Reverse the procedure to reinstall. It took me longer to clean the components and the area that to repair the problem. Tip: Isopropyl alcohol in a spray bottle and a cloth cuts the grease and grime, if needed, with very little effort and no scratching.
My repair man was able to change out the old, cracked top and replace it with the new one in less than an hour. The wires underneath were pretty straightforward, but he mentioned that the burns were off and he adjusted. Wanted to mention that it was an easy adjustment. Also, other reviews mention needing two people for this job. I had to
... Read more help once in placing something under the cooktop while he adjusted a burner..otherwise, it was all him. Everything arrived in great condition and was securely packaged from PartSelect (thank you!).