This is a duct felt seal for a dryer. The duct felt seal allows the front-load dryer drum to glide smoothly on the front panel. Your dryer will not function properly if the drum felt seal is compromis...
This drum glide bearing is an authentic OEM replacement part that is compatible with dryers. It is white in color and made of highly durable plastic. The bearing allows the drum to rotate smoothly and...
This OEM replacement dryer slide bearing is white in color, and approximately 3 inches long. The slide bearings are supportive linings for your dryer. If they have eroded, or are damaged, the drums wi...
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ...
This is a replacement lint filter slide for your dryer. It is approximately 14 inches long and 5 inches wide. It is made of white plastic and is sold individually. The slide mounts to your dryer and a...
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
This is a door handle made for use with dryers. This door handle is made of solid white plastic and allows you to open and close the door of the dryer. If your current dryer door handle is broken or m...
The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a ...
$105.30
In Stock
Questions And Answers for GUD24ESSJ0WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
13 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carlvin
January 29, 2020
Water is not filling up enough to do a load
For model number GUD24ESSJ0WW
Hello and thank you for writing.
It certainly sounds like it could be a faulty pressure switch PS7320331 (The pressure switch detects the water level in the tub. ) and or the water inlet assembly PS9491778, you should check the part(s) for signs of damage or test with a multimeter, and replace it as needed. we have attached the part links related to this question for your convenience. We hope this helps. Please contact us anytime if you require further assistance.
Hello, My washer will not close the DRAIN when filling. I unplug it and plug it back in and it works for a few loads.
What part or sensor do I need to fix my problem.?
For model number GUD24ESSJ0WW
Hi Helen, thank you for contacting us. We have researched the model and would suggest making sure the house drain pipe is at least 30 inches high. If so, check to make sure the drain hose is not pushed too far down into the drain. There must be an air gap around the drain hose. A snug fit can cause a siphoning action. If the issue remains, the problem might be with the drain pump, part number PS12171618, itself. There is a chance that it might be grounded out, making it run even when there’s no more water for it to drain from the washer. Checking the drain pump for continuity using a multimeter might help. Good luck with this repair!
The Washer won't start. Everything else seems to be fine except the start button for the washer.
For model number GUD24ESSJ0WW
Hello Melia, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the button selector, part number PS11726734, to solve the problem. We hope this helps!
Hello Tricia, thank you for getting in touch. According to our research, the issue is most probably with the water inlet valve, part number PS12343369. You may need to replace it to fix the issue. We hope this helps!
Hello Dennis, thank you for your question. Yes, usually a washer will drain and rinse only once unless there is a second rinse option on that unit. I hope this helps.
It was actually my father, he doesn't use the internet. He thought that because the dyer got real hot and then shut off he thought the thermostat wasn't working and the high temp shutoff was okay. He went through the manual and found the part and took it out. He called the service number but they wanted $50 dollars plus shipping. I saw it
... Read more was a Thermo-disc part so I tried the manufacture's website but I couldn't match the numbers on the back to their part numbers. I tried several other sites and your site was the cheapest. It was real easy to use the web site and diagrams to find the right schematic and part. I ordered it online and it was delivered in 2 days with the regular shipping. When he first put it in the dyer didn't turn on. He found no power coming out of the timer so he cleaned the contacts and it worked. Thanks for making the ordering so easy.
The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a pow
... Read moreer fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website.