The drum belt attaches to the motor pulley and causes the drum to spin as the motor is rotating. The drum belt is made of black rubber. This is an easy repair and should only take a few minutes. This ...
This is a thermistor, also known as a dryer thermistor. The thermistor is attached to the blower housing, it will help regulate and oversee the temperature within the dryer. The most common symptom of...
This idler pulley assembly is sourced from the original manufacturer for use in dryers. The assembly includes the pulley wheel and bracket. It is found near the motor where it provides tension to the ...
This dryer heating element produces heat to dry clothes in a dryer and is located in the rear end. If the heater element is burned, dryer does not heat or over heats, or clothes take too long to dry, ...
The drum support roller and axle, which includes the roller shaft and mounting clips, is used in dryers. This part holds the drum as it rotates on the support wheels. When the roller begins to wear ou...
This thermostat is a genuine OEM part and is manufacturer-approved for electric dryers. The thermostat is responsible for monitoring and maintaining the temperature inside the dryer during the drying ...
The thermal fuse measures the air temperature inside your dryer drum, and turns the heat on and off to maintain the optimal temperature during the drying cycle. If your dryer will not start, dry cloth...
This genuine OEM heater duct assembly in your dryer directs hot air into the drum during operation. Generally, it can be found behind the drum or at the rear of the dryer. If this assembly becomes dam...
This moisture sensor plate is specifically designed to fit with your Samsung dryer. It is made of stainless steel and measures approximately 5 inches long. It is designed to detect the amount of moist...
The high limit thermostat is designed for use in your dryer. The function of this part is to make sure that your dryer does not get too hot. If your dryer is not regulating heat properly, you may need...
This thermal cut-off fuse bracket assembly is a genuine replacement part supplied directly by Samsung for use in dryers. It is a safety component that is designed to protect the dryer from overheating...
$50.85
In Stock
Questions And Answers for DV210AEW/XAA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anne
February 1, 2023
My dryer is not producing any hot air. Not sure what part to buy.
For model number DV210AEW/XAA
Hello Anne, thanks for reaching out. We have researched your model and would recommend checking the following parts: the heater assembly, part number PS4220205, and the thermistor, part number PS4204984. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Display lights up. Displays a dustpan and a brush. Will not tumble or heat. Thanks for your help!
For model number DV210AEW/XAA
Hi Keith, thank you for reaching out. Based on our research, the icon displayed indicates that you may need to clean the lint filter, part number PS4206807. If cleaning it does not solve the issue, then you may need to check the following parts: drive belt, part number PS4133825, idler pulley assembly, part number PS11771601, moisture sensor, part number PS4206812, and heating element, part number PS4205218. We hope this sorts out your problem!
I have put it on the different cycles and none of them have high just cool air .
For model number DV210AEW/XAA
Hello MJ, thank you for contacting us. The issue could be due to a faulty thermistor, as it monitors the temperature and turns the heating element on. Use a multimeter to check the thermistor for continuity. If the thermistor, part number PS4204984, does not have continuity replace it. If the thermistor is okay, check the heating element using a multimeter for continuity. If the heating element, part number PS4205218, does not have continuity replace it. We hope this helps.
Does my dryer have a thermostat? What parts will I need if it is not heating or taking a long time to dry
For model number DV210AEW/XAA
Hello Carol, thank you for getting in touch. According to our research, your model has a high limit thermostat. To resolve your issue, we would recommend checking the dryer thermistor, part number PS4204984. We hope this helps!
YouTube, YouTube, YouTube. I YouTubed many videos on how to take a dryer apart to reach the drum support roller and axle. After watching numerous videos, I settled on one that had my exact model of dryer. For my dryer, previous inputs said I needed two rollers to for my model. That is not the case. My model actually has 4 rollers, 2 in th
... Read moree front and two in the back. I ordered 2 initially but only needed 1 thankfully since only one roller was bad. Keep it simple stupid is how I got it done. Dryer's are pretty simple machines mechanically. Don't trash your noisy dryer. We bought ours in 2014 and it only recently started giving us issues. This is after 2 moves and being run daily for a family of 6. I'm glad I found partselect.com. They saved me a ton of money.
Well it went really well until the dryer was put back together as it still didn’t heat. The dryer was taken apart again. This time the thermistors &fuse was tested. Alas, the new fuse was faulty. After putting the car lid fuse back on n, the dryer worked again