Models > 4260

4260 - Overview

Models starting with 4260

Click on the best match to narrow your results.

Exact Part matches for your search term

[Viewing 1 of 1]
15" Compactor Bag Carrier with Easy Grip Handles – Part Number: 13030RP
15" Compactor Bag Carrier with Easy Grip Handles
This part number matches the current model number 4260
PartSelect #: PS1782408
Manufacturer #: 13030RP
This 15 inch compactor bag carrier fits around the compactor bag inside the compactor and is used to easily lift and remove trash compactor bags once they are full. Simply place the reusable bag carri...
$35.98
  In Stock
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(66)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$11.75
  In Stock
Multi Rib Belt – Part Number: WP40111201
Multi Rib Belt
★★★★★
★★★★★
(103)
PartSelect #: PS11742271
Manufacturer #: WP40111201
This dryer drum drive belt attaches to the motor pully and works the drum as the motor rotates. The belt has a length of 93- 3/6 inches, and wraps all the way around the dryer drum, around a tension p...
$9.46
  In Stock
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.43
  In Stock
Ceramic Fuse - 20 amp – Part Number: WPM0805101
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(3)
PartSelect #: PS11747931
Manufacturer #: WPM0805101
This microwave fuse is just over an inch in length. It has a white ceramic center, and metal on either end. This is a twenty amp 250-volt fuse, and is used to power your microwave. If your microwave w...
$10.21
  In Stock
Heat Resistant Adhesive – Part Number: W10841140
Heat Resistant Adhesive
★★★★★
★★★★★
(1)
PartSelect #: PS11728058
Manufacturer #: W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising th...
$23.88
  In Stock
Hex Nut – Part Number: WP488130
Hex Nut
★★★★★
★★★★★
(2)
PartSelect #: PS11742711
Manufacturer #: WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air cond...
$9.58
  In Stock
Screw 8-18 x 1 – Part Number: WP489474
Screw 8-18 x 1
★★★★★
★★★★★
(1)
PartSelect #: PS11742753
Manufacturer #: WP489474
Sold individually.
$11.02
  On Order
Capacitor – Part Number: 59001651
Capacitor
PartSelect #: PS2055702
Manufacturer #: 59001651
$35.43
  In Stock
Nut – Part Number: 603773
Nut
PartSelect #: PS9044259
Manufacturer #: 603773
$3.99
  In Stock
Element-Air Fil Vf – Part Number: 107-4621
Element-Air Fil Vf
PartSelect #: PS8833897
Manufacturer #: 107-4621
$4.99
  In Stock
Nut – Part Number: M0282005
Nut
PartSelect #: PS1722350
Manufacturer #: M0282005
$10.99
  Special Order
Seal-Oil – Part Number: 611396
Seal-Oil
PartSelect #: PS9045743
Manufacturer #: 611396
$6.27
  In Stock
View More
Back to Top

Common Symptoms of models starting with 4260

[Viewing 4 of 4]
Noisy
Fixed by
these parts
Fixing
Show All
Leaking
Fixed by
these parts
Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Show All
Back to Top
Replacing the Light Bulb - 40W

Replacing the Light Bulb - 40W

Replacing the Multi Rib Belt

Replacing the Multi Rib Belt

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace drive belt
Remove front panel, lint basket, motor mounts,exhaust hood, front drum brackets. Then slip serpentine belt around drum, pressure w/ tension idler pulley and slip around drive motor spindle. Replace all parts in reverse order (a two person job).
Vacuumed inside of dryer (full of lint.)
Parts Used:
Multi Rib Belt
  • Robert from Skokie, IL
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver
304 of 354 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original belt finally gave way.....(15yrs old)
Simply remove the front panel screws(2) at the bottom of the dryer. Pull bottom of panel outward until it swings free of the top(taking care not to pull the wires out). Rotate out of the way and remove the two left side screws holding the drum plate and snake the belt around the flange. Reinstall those screws and remove the same ones on the right side. Snake the belt behind that flange and reinstall screws. Then all you have to do is run the belt around the motor sheave and the idler pully and your done. Reinstall the front panel.
Read less
Parts Used:
Multi Rib Belt
  • Garrett from Racine, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
24 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave oven blew fuse
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
Read less
Parts Used:
Ceramic Fuse - 20 amp
  • tad from tamarack, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
24 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top