Kenmore Ice Maker Hoses and Tubes

Videos!

Your Price

$36.12

Kenmore Ice Maker Water Tube Kit

★★★★★

7 Reviews

PartSelect Number PS11730901

Manufacturer Part Number W10823511

This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may need to be cut. This water tube transports water to the ice and water dispensers. If your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Fixes these symptoms

Ice maker not making ice
Leaking
Not dispensing water
See more...

Installation Instructions

Trent from Tacoma, WA

water dispenser started leaking

i wasn't sure it was the inlet valve unit because the leak was at the water dispenser in the freezer door. after some research it looked like the water inlet valve located in the back lower part of the refrigerator was the problem. to replace, take off the cardboard cover, about 6 screws, you have access to the water inlet valve, disconnect the hoses (i think it goes without saying that you should have turned off the water to the frig) replace the inlet valve, connect hoses, turn water back on and you'll be back in business. very easy repair. Read more...

Your Price

$75.69

Kenmore Ice Maker Tube

★★★★★

1 Review

PartSelect Number PS11750555

Manufacturer Part Number WPW10217922

Your Price

$11.12

Kenmore Ice Maker Plastic Tubing Inserts - 4 Included

PartSelect Number PS371246

Manufacturer Part Number 4387491

This is a plastic tubing insert kit for a refrigerator ice maker. This kit includes a package of four tubing inserts. The kit does not include other parts such as the ice maker water fill tube kit or ice maker fill tube gasket, so consider ordering those parts if necessary. The inserts are used with 1/4-inch plastic tubing. The inserts attach on the end of the water tubing to provide a smooth and solid connection between the water tubing and the clamp that attaches the tubing to the water fill valve. This is an OEM part from the genuine manufacturer.

Fixes these symptoms

Ice maker not making ice
Leaking
See more...

Installation Instructions

Sandra from Temecula, CA

ice maker was leaking water

Parts went right into place as the pictures showed and was working again in about 30 minutes. The only thing that wasn't working was the ice took forever to make, but solved that problem by turning up the temp in the freezer. Read more...

Your Price

$13.15

Kenmore Ice Maker Compression Nut

★★★★★

1 Review

PartSelect Number PS11743305

Manufacturer Part Number WP627018

The compression nut is used as a connection between the water supply line and other components in your refrigerator such as your ice maker and your water dispenser. Tools required for this repair include a pair of pliers and a socket set. Before installing this part you should take all perishable foods out of your refrigerator and store them somewhere cool, unplug the refrigerator from the power source, and shut off the water supply. This repair may require you to wear work gloves to protect your hands, and is considered an easy do-it-yourself fix.

Fixes these symptoms

Ice maker not making ice
Leaking
See more...

Installation Instructions

harry from murfreesboro, TN

Water leaking from bottom of fridge

The line going from the ice maker fill valve ruptured and leaked water on the floor. The outlet fitting for the ice maker water inside the freezer was plugged with ice which caused the pressure to build up in the line and rupture it. The discharge tube inside was full of ice because the ice maker fill valve was old and was leaking ever so slightly. This allowed water to exit into the discharge tube gradually and build up ice to the point of blocking the discharge tube. Read more...

Your Price

$49.79

Kenmore Ice Maker Water Distributor Tube

★★★★★

1 Review

PartSelect Number PS11738017

Manufacturer Part Number W10863947

The water distributor tube distributes water from the reservoir to the evaporator plate.

Installation Instructions

Gerald from ELMHURST, IL

The tunes were moldy and the pump didn't work.

The repair was fairly easy. Take out screws and lift top of ice maker but do not take off. Having 2 people to do this helps. Clean all parts with calcium deposits. Replace all moldy or broken parts. Some parts are harder to replace. The back screw of the pump is difficult to install. Use a magnetic screw driver for help holding the screw. We used a little wax to keep the screw on the driver. The ice maker works better than it has in 2 years. Read more...

Your Price

$19.82

Kenmore Ice Maker TUBE

PartSelect Number PS12070847

Manufacturer Part Number W11097809

Your Price

$30.58

Kenmore Ice Maker Tube

PartSelect Number PS11757092

Manufacturer Part Number WPW10678300

Your Price

$24.92

Kenmore Ice Maker Water Line - 1/4"

★★★★★

1 Review

PartSelect Number PS292409

Manufacturer Part Number WR17X1948

This water line 1/4, also known as a ice maker fill tube, is used in freezers and refrigerators. The tube directs the water into the ice maker cup during the cycle in which it fills the cup. The water line height is 0.6 inch and it weighs 0.1 lbs. As a safety precaution, unplug your appliance from the power source before installing this part. Remember to safely store food when it is removed from fridge or freezer. Refer to the installation instructions provided by the manufacturer for further guidance and accuracy.

Fixes these symptoms

Leaking
See more...

Installation Instructions

RUSSELL from BLACK HAWK, SD

water line cracked

I loosened the compression nut on the valve with my fingers and pulled the water line free from the valve. On the other end, I just pulled it from the hose clamp. Installation in reverse. Force the water line into the fitting on top, Slide the old nut over the line on the bottom. Screw the nut onto the valve. Reach inside the freezer and turn on the ice maker. Done. Before replacing the cardboard grill, you should vacuum the coils on the bottom, front and back. If practical, push it outside and blow it out with an air compressor or a leaf blower. Read more...

Your Price

$30.24

Kenmore Ice Maker HOSE

PartSelect Number PS11773097

Manufacturer Part Number W11033204