Kenmore Dishwasher Doors
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Kenmore Dishwasher Doors
Kenmore Dishwasher Door Cable and Eyelet
1. Using a Philips' head screwdriver, remove the four screws holding the lower front panel (below dishwasher door).
2. Remove the faulty eyelet cable(s) hooked into the springs at one end and the door hinges at the other.
3. Take the new eyelet cables and hook them onto the door hinge on either side. Ensure a secure fit.
4. Guide the eyelet cable around the spinwheel on one side and insert the hooks of the springs into the eyelets.
5. Pull on the springs and insert their hooks into the eyelets of the other cable, ensuring a secure fit.
6. Test the door by opening and closing it a few times to ensure the spring has tension.
7. Replace the lower front panel cover removed in step 1 with its screws. Read more...
PartSelect Number PS263918
Manufacturer Part Number WD7X14
This part is sold individually. It is recommended that both sides are changed when replacing one.
Fixes these symptoms
- Door latch failure
- Door won’t close
- See more...
Installation Instructions
Karthik from Springfield, VA
Dishwasher door became really heavy to operate
Note: This procedure assumes replacement of both eyelet cables. It is recommended that both eyelet cables be replaced at the same time.1. Using a Philips' head screwdriver, remove the four screws holding the lower front panel (below dishwasher door).
2. Remove the faulty eyelet cable(s) hooked into the springs at one end and the door hinges at the other.
3. Take the new eyelet cables and hook them onto the door hinge on either side. Ensure a secure fit.
4. Guide the eyelet cable around the spinwheel on one side and insert the hooks of the springs into the eyelets.
5. Pull on the springs and insert their hooks into the eyelets of the other cable, ensuring a secure fit.
6. Test the door by opening and closing it a few times to ensure the spring has tension.
7. Replace the lower front panel cover removed in step 1 with its screws. Read more...
Kenmore Dishwasher Door Spring Kit
PartSelect Number PS2097003
Manufacturer Part Number 901111
Sold individually.
Fixes these symptoms
- Door latch failure
- Door won’t close
- See more...
Installation Instructions
Rock from Freeport, ME
Right Side Door Springs Broken
With the dishwasher door open remove the 3 srews connecting the top of the dishwasher to the bottom of the kitchen counter top. Remove the lower access panel from the dishwasher and lower the dishwasher about 1/4 inch in the front and back of the dishwasher). Once you have lowered the dishwasher enough slide the dishwasher out about 6 inches (enough to gain access to the door springs on the left and right side). Remove all broken spring parts and replace using new springs. The left side of the door contained a single heavy duty spring and the right side of the door contained a heavy duty and light duty 'helper' spring. I replaced only the right side springs since the left side spring was in excellent condition. When the springs are installed slide the dishwasher back into its original position and raise the dishwasher back up to its original height using the front and back adjustment screws. Replace the 3 screws holding the top of the dishwasher secure to the bottom of the countertop. Ensure that the door opens, closes and latches smoothly and then replace the lower access panel. Job done.
Read more...
Kenmore Dishwasher Door Panel Insert
PartSelect Number PS11741289
Manufacturer Part Number WP3369769
This panel is reversible, black on one side, white on the other side.
Installation Instructions
stephen from west islip, NY
door insert all scatched up
Took me a while to figure out that the bottom plastic strip is all that holds in the panel. Once it is removed , it pulls out easily When the new panel arrived,just slide it up into the top grooove, and push the bottom strip back into its groove. The front looks like new!
Read more...
Kenmore Dishwasher Exterior Door Panel - Stainless
PartSelect Number PS3492862
Manufacturer Part Number 154829007
Your Price
$404.43
In Stock
Kenmore Dishwasher Exterior Door Panel - Stainless Steel
PartSelect Number PS3418317
Manufacturer Part Number W10301577
This is the outer door panel (Door Panel, Outer Door Panel, Dishwasher Door Outer Panel) for a dishwasher. This part can discolor, its finish can be damaged by improper cleaning, or it can be dented. The door panel mounts to the inner door assembly with screws. It can be replaced if the finish looks unacceptable due to getting dirty over time. Sold individually, this model is silver, metal and measures 24 inches by 26.75 inches.
Installation Instructions
Sandra from McKinney, TX
Wanted to replace white panel with stainless steel to match other appliances.
My husband removed the existing panel by removing the retaining screws. Installed the new panel and replaced the screws. Very pleased with the new look and how easy it was.
Read more...
Kenmore Dishwasher Door Panel Retainer Strip - Black
PartSelect Number PS11741321
Manufacturer Part Number WP3374010
Installation Instructions
Gail from Mayville, WI
door panels looked old/bad
Washed the edges good and clean to remove old tape that was holding the old panels. Slid in the new ones and found that the retaining strip would not work without replacing the inner strip. I didn't want to order this $53 dollar plastic strip so I squeezed a couple of rubber pieces into the bottom of the side edges to hold the top panel. Placed the retaining strip in place and used a long strip of black duct tape at this bottom edge to hold it all. It works and the new panels make the dish washer look close to new,the black duct tape hardly shows. This works good for my 10+ year old dishwasher until it is replaced with one that has a better door design.
Read more...
Kenmore Dishwasher Exterior Door Panel - Stainless
PartSelect Number PS11751654
Manufacturer Part Number WPW10274902
Kenmore Dishwasher Inner Door Panel
PartSelect Number PS261608
Manufacturer Part Number WD31X10004
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
john from Maspeth, NY
Broken Door
I removed all the screws from the inner cover , I t was neccesary to remove the kick panel cover to get at the bottom screws , the door came right off , I needed help with the hinges as they are spring loaded , it was a little tricky to transfer the soap dispenser from the old inner panel , it was worth the effort , the whole thing only took 20 minutes , dishwaser is like new again
Read more...
Related Kenmore Dishwasher Parts
- All Kenmore Dishwasher parts
- Kenmore Dishwasher Brackets and Flanges
- Kenmore Dishwasher Caps and Lids
- Kenmore Dishwasher Circuit Boards and Touch Pads
- Kenmore Dishwasher Dishracks
- Kenmore Dishwasher Dispensers
- Kenmore Dishwasher Ducts and Vents
- Kenmore Dishwasher Elements and Burners
- Kenmore Dishwasher Filters
- Kenmore Dishwasher Grilles and Kickplates
- Kenmore Dishwasher Handles
- Kenmore Dishwasher Hardware
- Kenmore Dishwasher Hinges
- Kenmore Dishwasher Hoses and Tubes
- Kenmore Dishwasher Insulations
- Kenmore Dishwasher Knobs
- Kenmore Dishwasher Latches
- Kenmore Dishwasher Legs and Feet
- Kenmore Dishwasher Motors
- Kenmore Dishwasher Panels
- Kenmore Dishwasher Pumps
- Kenmore Dishwasher Racks
- Kenmore Dishwasher Seals and Gaskets
- Kenmore Dishwasher Sensors
- Kenmore Dishwasher Spray Arms
- Kenmore Dishwasher Springs and Shock Absorbers
- Kenmore Dishwasher Switches
- Kenmore Dishwasher Thermostats
- Kenmore Dishwasher Timers
- Kenmore Dishwasher Valves
- Kenmore Dishwasher Wheels and Rollers
- Kenmore Dishwasher Wire Plugs and Connectors