Kelvinator Refrigerator Trays and Shelves

Kelvinator Refrigerator Door Shelf Retainer Bar

★★★★★

★★★★★

166 Reviews

This door shelf retaining bar, also known as refrigerator door bar retainer or fridge door rack, is a genuine part sourced from the original manufacturer. It is a white This manufacturer-certified Door Shelf Retainer Bar, sometimes otherwise known as the door rack or bar retainer, is a white, plastic part which can be easily installed onto the inside of the refrigerator or freezer door to hold items on the door shelves. It holds items in your fridge and will show physical damage if broken or warped, at which time it should be replaced. Check your user manual and model number to see if this part is right for you. No tools are required for this installation, the part should simply snap into place. This part measures roughly 25 inches wide, 3 inches high, and 5 inches deep. This part is sold individually, and we recommend checking the other door shelf retaining bars on your refrigerator or freezer at the same time as ordering this part to ensure that no others need to be replaced, as they often wear or warp at similar speeds.

Kelvinator Refrigerator Door Shelf Retainer Bar

★★★★★

★★★★★

78 Reviews

The Door Shelf Retainer Bar, also known as a refrigerator door rack, is a white, plastic part which can be easily installed onto your fridge door. It holds items in your fridge and will show physical damage if broken, at which time it should be replaced. Check your user manual and model number to see if this part is right for you. To install this part, you will need to remove the old one by unlocking the tabs, which can be slid with your fingers. To install the new shelf, line it up with the shelf cut-outs, over the tabs, and gently press it down to lock it into place. This part generally fits the middle door shelf of refrigerators. This is a part that frequently requires multiple parts per refrigerator. Because it is sold individually, you will need to purchase as many door racks as necessary to complete your repair.

Kelvinator Refrigerator Crisper Glass Shelf Insert

★★★★★

★★★★★

56 Reviews

Glass only. This glass insert measures 23.82 x 15.50-in. This is an authentic Frigidaire replacement part. The crisper shelf insert is designed by the manufacturer for use in refrigerators. This part is made of glass, and is placed over the crisper pan drawers. No tools are required when replacing this item. Simply remove the old part and slot the new one into place. This item is sold individually.

Kelvinator Refrigerator Crisper Drawer Cover

★★★★★

★★★★★

32 Reviews

This is a cover for the crisper pan in your refrigerator. This cover is designed to allow both crisper drawers to slide in and remain covered, while also offering shelf storage above. This cover is made of durable white plastic that measures 25.75 inches wide and 18.75 inches deep and features two sliders on each side to adjust the humidity as necessary. This cover is only the frame for the crisper drawer assembly and does not come with the necessary glass pane insert. If your current crisper drawer cover is cracked or broken and not able to support the drawers or glass above it, it needs to be replaced. This cover is an OEM part and is sold individually.

Kelvinator Refrigerator Shelf Trim - Rear

★★★★★

★★★★★

6 Reviews

This is a replacement rear shelf trim for your refrigerator. It is approximately 24 inches long and 1 inch wide. The shelf trim is made of white plastic and is sold individually. You will find the rear shelf trim connected to the shelf, in the back of the fridge. The main reason you would replace the shelf trim is if the old one is damaged or missing. This is an authentic OEM part from the manufacturer.

Kelvinator Refrigerator Front Shelf Trim

★★★★★

★★★★★

5 Reviews

This trim goes on the front of the shelf.

Kelvinator Refrigerator Door Shelf End Cap - Left or Right Side

★★★★★

★★★★★

9 Reviews

This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf. It is white in color, made of plastic material and measures about 2 inches high by 3 inches deep. This might need to be replaced if it has broken or worn over time. This repair requires no tools. You will need to open your fridge, pull upwards on the existing end cap, and pull outwards. There is a locking tab on either end so it does not matter if the top or bottom comes out first. Slide the new end cap onto the rail and it is installed.

Kelvinator Refrigerator Crisper Cover Frame - No Glass

★★★★★

★★★★★

10 Reviews

This is an OEM crisper cover for refrigerators. The crisper drawer is responsible for holding and storing fruits or vegetables at specific humidity levels, to ensure they last fresher for longer. If your current crisper drawer cover is damaged or moldy and no longer able to properly store your food, it must be replaced immediately. This crisper cover only includes the crisper frame and does not come with the necessary glass pane insert that rests on top, or the drawers that fit underneath it. This cover measures approximately 26-inches wide and 20-inches deep.

Kelvinator Refrigerator Freezer Shelf

★★★★★

★★★★★

14 Reviews

Sold individually. This shelf is for refrigerators. Follow the directions in the owner's manual to install refrigerator shelf in your refrigerator. Wear work gloves to protect your hands.

Kelvinator Refrigerator Freezer Door Shelf Retainer Bar

★★★★★

★★★★★

8 Reviews

This is the replacement door shelf retainer bar for your refrigerator. This retainer part connects to the freezer door wall, and prevents items that are stored in the freezer door from falling out when the door opens and closes. The main reason you would want to replace the retainer bar is if the old bar is broken or missing. To replace the retainer bar, simply pop the old bar out of position and snap the new one into place. This retainer bar is approximately 24 inches long and 5 inches wide. It is made of white plastic and is sold individually.