General Electric Dishwasher Circuit Boards and Touch Pads
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular General Electric Dishwasher Circuit Boards and Touch Pads
Your Price
$110.65
In Stock
General Electric Dishwasher Timer
PartSelect Number PS4704218
Manufacturer Part Number WD21X10474
The timer manages the various dishwasher functions such as filling, washing, draining and drying.
Your Price
$179.45
In Stock
General Electric Dishwasher Keypad - Black
PartSelect Number PS959685
Manufacturer Part Number WD34X11074
Fixes these symptoms
- Will Not Start
- See more...
Your Price
$196.40
In Stock
General Electric Dishwasher CONTROL TACTILE Assembly KIT
PartSelect Number PS4704220
Manufacturer Part Number WD21X10505
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Jeremy from TAOS, NM
Everything dead
1. Troubleshoot: Unplug, check power at outlet (OK), disassemble front door (phillips screws) from inside, remove safety switch cover to check operation (OK), remove metal shield over ckt board. Noticed burned and separated transformer leads. No repair possible, ordered new board(s), arrived promptly. 2. Replace: Piece of cake--remember to check for jumpers, had to remove one from old board and put it on the new one.
Read more...
Your Price
$215.06
In Stock
General Electric Dishwasher MODULE CONTROL Assembly
PartSelect Number PS2350039
Manufacturer Part Number WD21X10370
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Mark from Omaha, NE
Control module went out - causing the heating element to super heat, melting several of the plastic interior parts
I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.
Read more...
Your Price
$193.35
In Stock
General Electric Dishwasher Electronic Control Board Kit
PartSelect Number PS12342779
Manufacturer Part Number WD21X23556
The electronic control board kit manages the functions of the dishwasher such as washing, draining and drying.
Your Price
$219.40
In Stock
General Electric Dishwasher Main and Tactile Board Kit
I replaced the main board and control board, which really just involved taking apart the door, unplugging three wires, replacing the boards, then plugging the three wires back in.
After I did that and plugged everything back in, the Clean light flashed, and the dishwasher started beeping. It wouldn't respond to any controls, aside from the fact that pressing the Start button stopped the beeping.
Symptoms:
- Just replaced Control Board
- Clean light blinks
- Start button stopped beeps
- No other buttons did anything
Resolution: re-read the instructions that came with the board.
There's a step that says "Transfer model selector plug to the new control board". If you look on your old main board, right by the power connection is a plug that you're supposed to remove from the old board and put on the new board.
I had originally skimmed through the instructions thinking "this looks super easy", so I didn't look at it in detail until I had a problem.
Dishwasher works perfectly now. Read more...
PartSelect Number PS1481914
Manufacturer Part Number WD21X10247
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Jay from Rockford, MI
Dishwasher Wouldn't Start
The original problem was that the dishwasher wouldn't start or respond to any button presses. The Clean light stayed on consistently, but nothing else would happen.I replaced the main board and control board, which really just involved taking apart the door, unplugging three wires, replacing the boards, then plugging the three wires back in.
After I did that and plugged everything back in, the Clean light flashed, and the dishwasher started beeping. It wouldn't respond to any controls, aside from the fact that pressing the Start button stopped the beeping.
Symptoms:
- Just replaced Control Board
- Clean light blinks
- Start button stopped beeps
- No other buttons did anything
Resolution: re-read the instructions that came with the board.
There's a step that says "Transfer model selector plug to the new control board". If you look on your old main board, right by the power connection is a plug that you're supposed to remove from the old board and put on the new board.
I had originally skimmed through the instructions thinking "this looks super easy", so I didn't look at it in detail until I had a problem.
Dishwasher works perfectly now. Read more...
Your Price
$168.60
On Order
General Electric Dishwasher Keypad - Black
PartSelect Number PS959551
Manufacturer Part Number WD34X10915
This board sends information to the main control board for specific functions.
Fixes these symptoms
- Will Not Start
- See more...
Your Price
$184.88
Special Order
General Electric Dishwasher Keypad - Black
Turned off power to dishwasher (Breaker panel)
Removed old strip from top of door(flexible)
Unplugged connection
Cleaned off all adhesive and deposits from surface
Inserted Touch Control Panel flexible lead and connector through opening
Plugged it in to secure and test
Turned power on to test
Turned power off
Removed adhesive covering from back of Touch Control Panel
Carefully alligned and pressed into place.
Screwed door back together
Turned on power
Ran the dishwasher and it is running perfectly
The part was identical to GE OE with the same logos, et al
It was over $30 less cost and was delivered in 3 business days, well packaged. Read more...
PartSelect Number PS959676
Manufacturer Part Number WD34X11065
Installation Instructions
Robert from Charlotesville, VA
Touch Control Panel failed
Unscrewed door liner to get to plug in for Touch Control strip.Turned off power to dishwasher (Breaker panel)
Removed old strip from top of door(flexible)
Unplugged connection
Cleaned off all adhesive and deposits from surface
Inserted Touch Control Panel flexible lead and connector through opening
Plugged it in to secure and test
Turned power on to test
Turned power off
Removed adhesive covering from back of Touch Control Panel
Carefully alligned and pressed into place.
Screwed door back together
Turned on power
Ran the dishwasher and it is running perfectly
The part was identical to GE OE with the same logos, et al
It was over $30 less cost and was delivered in 3 business days, well packaged. Read more...
Your Price
$80.22
In Stock
Your Price
$279.08
Special Order
Related General Electric Dishwasher Parts
- All General Electric Dishwasher parts
- General Electric Dishwasher Brackets and Flanges
- General Electric Dishwasher Caps and Lids
- General Electric Dishwasher Dishracks
- General Electric Dishwasher Dispensers
- General Electric Dishwasher Doors
- General Electric Dishwasher Filters
- General Electric Dishwasher Grilles and Kickplates
- General Electric Dishwasher Handles
- General Electric Dishwasher Hardware
- General Electric Dishwasher Hinges
- General Electric Dishwasher Hoses and Tubes
- General Electric Dishwasher Insulations
- General Electric Dishwasher Knobs
- General Electric Dishwasher Latches
- General Electric Dishwasher Motors
- General Electric Dishwasher Panels
- General Electric Dishwasher Pumps
- General Electric Dishwasher Racks
- General Electric Dishwasher Seals and Gaskets
- General Electric Dishwasher Spray Arms
- General Electric Dishwasher Springs and Shock Absorbers
- General Electric Dishwasher Switches
- General Electric Dishwasher Timers
- General Electric Dishwasher Trims
- General Electric Dishwasher Valves
- General Electric Dishwasher Wheels and Rollers
