Frigidaire Microwave Oven Combo Elements and Burners

Your Price

$199.01

Frigidaire Microwave Oven Combo Bake Element - 3400W

★★★★★

11 Reviews

PartSelect Number PS1992188

Manufacturer Part Number 318254906

This bake element is found on the bottom of the oven.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven not heating evenly
See more...

Installation Instructions

Lynn from Denton, TX

Element burned up.

Removed old element and plugged in new. Very simple. Read more...

Your Price

$148.63

Frigidaire Microwave Oven Combo Bake Element

★★★★★

6 Reviews

PartSelect Number PS978772

Manufacturer Part Number 318255101

This is a 2100 watt bake element for your oven or range. The element supplies heat from the bottom of the oven to bake or cook your food. You may need to replace the bake element if your oven is not heating properly. Simply remove oven racks to access the bake element. Use a Phillips screwdriver to remove the two screws that secure the element to the oven body. Electrical wires feature slip-on connectors for easy installation, but be sure to hold the wires forward so the wires do not fall back through the rear of the oven. Unplug your appliance or shut off your circuit breaker to the appliance before installing the new part.

Fixes these symptoms

Element will not heat
Little to no heat when baking
See more...

Installation Instructions

James from Delaware, OH

Element showed a hot spot prior to failing open.

Replaced element. Removed shelves, removed two screws and lifted/wiggles old element out to pull wires off at connectors. Reversed process installing new element and truned on to test/burn off "newness" Done! Read more...

Videos!

Your Price

$153.51

Frigidaire Microwave Oven Combo Broil Element

★★★★★

7 Reviews

PartSelect Number PS3506411

Manufacturer Part Number 318255605

This broil element is found on the roof of the oven and heats food. The most common reasons you would need to replace this part is due to the oven not giving off enough heat, not turning on, or not baking your food at an even temperature. This could be due to the element being burnt out or broken. Make sure to unplug the oven before you begin. You will need to remove the oven from the wall to complete this repair. This is an OEM part that comes right from the manufacturer, ensuring the best quality.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Little to no heat when broiling
See more...

Installation Instructions

Kevin from Alexandria, VA

Broil element wasn't working...

I pulled my unit out of the wall and noticed that the insulation around the top broiler element was a bit brown. Closer inspection revealed that the element had shorted somehow to the oven itself and caused the element to become non-functional. I tried measuring the resistance first, and it was within typical values for the other elements, but I decided to replace the element anyway.

I ordered from PD and the part arrived just a few days letter by regular shipping. I undid the screws holding in the element, undid the wire connectors and replaced the broken element with the new one. The element worked like a charm and I was back in business for cooking. Read more...

Your Price

$161.46

Frigidaire Microwave Oven Combo Range Bake Element

★★★★★

4 Reviews

PartSelect Number PS978770

Manufacturer Part Number 318254902

This bake element is for ranges. Bake element is at the bottom of the oven and supplies the heat for baking. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

Fixes these symptoms

Element will not heat
See more...

Your Price

$356.18

Frigidaire Microwave Oven Combo Bake Element

PartSelect Number PS3655318

Manufacturer Part Number 318601604

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Heidi from RIDGWAY, PA

Lower oven would heat to temperature, but would not continue to maintain temperature.

Troubleshoot element by disconnecting the element leads from relay board and test for acceptable resistance across leads. In my case the element had tested open with no resistance.

******You may not need to remove oven depending on how the framing under the oven is constructed.

**** Before you begin, disconnect power from the oven.

1.Remove two screws under oven, directly below rear of element door, and remove the metal piece the screws held in place. This will free up the back of the element access door panel.
2.Remove front trim strip on front bottom of oven, this will expose two screws directly behind trim strip. Remove the two screws behind the trim strip. This will free up the front of the element access door.
3. Lower element access door. If you can open the element door enough to disconnect the element wire leads and get the element out, you can swap out the element now and will not need to pull your oven out of the wall. If you can't open the access panel to fully access and replace element, slide the oven out until you can get the access door open and prop the front of the oven up on something sturdy you have laying around. In my case it was the good old yeti cooler. I would seriously consider removing the oven doors before you slide the oven out. It will make the oven alot less tippy by removing the weight from the front off the appliance. The element wires are short, you may need to disconnect them to get the element access door all the way open.
4. Install the new element and reassemble using these instructions in reverse order.
5. Reconnect power.
6. Make a batch of cookies. Read more...

Your Price

$155.53

Frigidaire Microwave Oven Combo Bake Element - 1450W

PartSelect Number PS2364235

Manufacturer Part Number 318902502

Your Price

$170.65

Frigidaire Microwave Oven Combo Broil Element

PartSelect Number PS453603

Manufacturer Part Number 5303016247

This broil element supplies heat for cooking and is located in the roof of an oven. If there is little to no heat when cooking, a damaged element, or food is taking too long to cook, these symptoms could be solved by replacing this part. Before starting this replacement, make sure to unplug your range from the power source or shut off from the house circuit breaker. You will need a Phillips screwdriver to complete this repair. This part comes in a matte black color. For safety reasons, make sure to wear gloves. Refer to the manual provided by the manufacturer.

Fixes these symptoms

Little to no heat when broiling
See more...

Your Price

$167.92

Frigidaire Microwave Oven Combo Broil Element

★★★★★

1 Review

PartSelect Number PS3507538

Manufacturer Part Number 318255606

Fixes these symptoms

Element will not heat
See more...

Your Price

$126.89

Frigidaire Microwave Oven Combo Broil Element - 3000W 240V

★★★★★

2 Reviews

PartSelect Number PS429510

Manufacturer Part Number 220T017P02

Fixes these symptoms

Little to no heat when broiling
See more...

Installation Instructions

MG from ENCINITAS, CA

Broiler element burnt out. It literally broke off & emitted white-hot sparks.

NOTE: My Tappan oven (model 77 4972 23) is 33 years old & it was difficult to find the correct part number for the broiler element. Part No. 5303051140 (PS 453940) costs only $18.00 but won't work because the plate that screws onto the oven is only 1.5 inches wide and it needs to be 3.75 inches wide to fit. The part number that works (and costs $89.00) is 220T017P02 (PS429510).

First thing I did was turn off power to the range at the circuit breaker. The repair was generally easy with the exception that 1 screw holding the broiler element support was "welded" into the oven ceiling. I stripped the screw trying to get it out. Fortunately, I had a special tool that allows one to grip the outer edge of the screw while turning it --- and that's how I got it apart. Once the broiler element support was off, I removed 2 screws from the 3.75 inch plate holding the broiler element itself to the oven wall and carefully pulled the broiler element out from the oven wall and detached the wire clips connecting the wires to the broiler element. I reattached the clips onto the new element and installed the new element back into the oven wall. I then reattached the broiler element support using a another screw (because I decimated the original one). I then turned the circuit breaker back on and turned the broiler on. Voila. My broiler works again! Special thanks to the people at this site who were very helpful in seeing to it I got the correct broiler element. The original ordered broiler element was delivered to the wrong address. The folks at this site sent me another one. To make a long story short, they saw to it I got the correct part. I highly recommend this site based on my experience with them. GREAT customer service!! Read more...